Printable View
i'm a linux newbie. i downloaded the 3.3v of knoppix live cd and i can't seem to get the network to work. my netcard is recognized, i run netcardconfig but i can't get on the network. the network connects to the internet. i get the ip, subnet, gateway, dns, everything. same thing works on suse and mandrake live cds. i need help. what can i do? :?
Networking 101:
Can you ping by i.p.?
ping 66.218.71.198
If so can you ping yahoo.com
ping www.yahoo.com
You can try to restart the network interface like so:
sudo /etc/init.d/networking restart
You can also run pump:
pump
What kind of NIC?
I am also looking to use the live knoppix to connect to my lan. I have a windows 2003 server, and would love to use the live knoppix as a client boot disk.
It states that "lisa" (Linux Internet Server Administration) is not running because with the live knoppix you don't get root access. which you need to get it started.
So- how do I start lisa with the live knoppix? Or, do I need to set up knoppix on a hard drive, install all the drivers, settings, and programs I want for the client machine, then burn it to a bootable iso cd rom?
Well, once I learn how, I post back!
Hi Jeremy,
In a Konsole (the screen with the seashell) type "sudo su" to become root. Or change to VT1..4 with <ALT><CTRL><F1>..<F4>, there you are root, back to KDE with <ALT><CTRL><F5>.Quote:
...because with the live knoppix you don't get root access...
Ciao Martin
well i'm new to linux, not that new to networks :)Quote:
Originally Posted by rickenbacherus
no, i cannot ping to ips or urls. i cannot even ping my gateway (which is at my isp's). it all works fine with windows, suse 9.0 demo and mandrake move (both live cds).
my netcard is d-link dfe-530tx.
What does lsmod in a console window (clam shell icon on the taskbar) tell you you should see 8139too listed with a 1 beside it at least that is what is uses for my card but it is a tx+. You can try mii-tool -r to restart the card autonegotiation and then do netcardconfig to configure the card.Quote:
Originally Posted by hicks
hm... u can try using slackware live cd
http://www.slackware-live.org
i havent try b4.. well.. guess and hope its nice...
Hi,
a new star will be born RSN. Its worth a try!
Ciao Martin
Try adding thefollowing to the end of /etc/init.d/networking:
echo 0 > /proc/sys/net/ipv4/conf/cm0/rp_filter
Let me know if that helps...
nothing really helped. but, i thought to give it another try so i loaded knoppix and as usuall just tried to setup the network (netcardconfig, nothing special) and for some strange reason it actually worked. i have no idea why since i've been trying the same thing for a while now. go figure. so this time i saved the settings and now it works every time i boot knoppix.
i only wish i knew how or why.
thanks for all the help though.
If you have a Realtek 8139 card you need to use the cheatcode NOAPIC when booting off your live CD.
i tried that one too. did not make any change. :(
Have you read these threads:
http://www.knoppix.net/forum/viewtopic.php?t=2164
and
http://www.knoppix.net/forum/viewtopic.php?t=2117
and does it sound like your problem?
I've gotten wireless networking to work on my laptop without problems. It's a Inspiron 7000 400MHz with a Linksys WPC11 v. 3 pcmcia card.
First, I booted from Knoppix 3.3 disc with the nodhcp lang=en display=wmaker boot parameters. (I use static IP at home). The disc recognized the card and loaded the appropriate drivers.
Then, to set up the network I got to root then ran iwconfig. Enter the ssid ("cove_circle") and the network type. "Managed" (the default) is the same as "infrastructure" in Linksys's terminology. I didn't use WEP at first. All of the other parameters iwconfig asks for may be left blank.
Then enter:
Finally, edit /etc/resolv.conf to list your DNS nameservers.Code:ifconfig eth0 192.168.1.105 (use your computer's IP number on the network)
ifconfig eth0 broadcast 192.168.1.255 netmask 255.255.255.0
route add -net default gw 192.168.1.1 netmask 0.0.0.0 metric 1
That's it. It just works.
Further adventures in getting a Linksys wireless card WPC11 to work under Knoppix on Dell Inspiron 7000:
When I boot from the Knoppix 3.3 dusc, the Linksys WPC11 is recognized without a problem. Once I did the hdinstall (using knx-install not knoppix-install), the wireless card would not be recognized. I don't know if an installation under knoppix-install would do better.
During boot, I goot the message "eth0: Error -110 reading firmware info. Wildly guessing capabilities..."
After a little searching, I found this site (http://www.hoffmannet.com/~thoffman/...0wireless.html) which pointed out a problem with the Inspiron laptops:
"Basically, it looks like there is a strange or old PCI-PCMCIA bridge in the I7000. I believe that this is leading to port conflicts when the wireless drivers are loading. I solved the above problems on both wireless cards by making the following changes to my config files:
edited my /etc/pcmcia/config.opts file and changed:
to:Code:include port 0x100-x4ff, port 0x00-0xcff
and for good measure I added below that line:Code:include port 0x300-x4ff, port 0x00-0xcff
Code:exclude port 0x100-0x2ff
Now, both the Cisco and the Lucent cards are working in both Linux"
I made those changes and now I'm on the network. Everything else appears to work at this point.