-
apt-get after knoppix-installer on 3.4
I got knoppix installed perty painlessly on my HD now and am not used to debian based systems, but know a little about apt-get. I did apt-get update and then apt-get upgrade to get all my installed packages uptodate. After the upgrade i get the following message.
I dont really know what it's trying to tell me. Anyone know? Also is there a basic guide to how apt-get works and how i should use it with knoppix. Debian has always interested me just the installers seamed to be too complicated. with knoppix it's very straight forward 
Thanx for the help.
-
Senior Member
registered user
Bfc,
Yep, I've seen it, and I used to get the same thing. I hard drive installed Knoppix v3.3, and my first apt-get update came up with "pretty close" to the same results...
If you look at the "man apt-get" from a konsole prompt, you will find that apt uses the /etc/apt/sources.list file to know where and what to get from... All of the locations that are being hit, ignored, and in some of your cases, "permanently moved", are all listed in that file...
What I ended up doing, was keeping the list of what you have in your post viewable, editing the /etc/apt/sources.list file, and placing a "#" in front of the permanently moved, and the not found entries. Then saving the file, and exiting. Then try another apt-get update to see if you got them all. My apt-get is now cleaned out of those entries, by the use of commenting them out.
I know, its a pain, but it makes for faster, and nicer looking apt-get's 
Cuddles
-
Senior Member
registered user
An alternate method is to edit the /etc/apt/sources.list and change all of the
http://ftp.us.debian.org lines to read http://ftp.de.debian.org. That's a german mirror but it should work without giving you problems. If you comment out the faulty mirrors, you'll reduce the amount of packages available to download and update, so I find it better to change the mirrors as needed so I can continue to get all of the updates I want/need.
-
thanx, worked great, now if i could get 3d acceleration with my 9700
3 hours+ trying to just install graphix drivers just isnt right.
-
bfc, try this site for details on howto get ati drivers running.
http://xoomer.virgilio.it/flavio.sta...installer.html
Similar Threads
-
By jonli in forum Customising & Remastering
Replies: 2
Last Post: 02-15-2006, 11:51 PM
-
By jjbergdolt in forum Hdd Install / Debian / Apt
Replies: 12
Last Post: 06-21-2005, 05:57 PM
-
By A. Jorge Garcia in forum Hdd Install / Debian / Apt
Replies: 11
Last Post: 12-24-2004, 03:59 PM
-
By ValhallaSystems in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 07-25-2004, 06:36 PM
-
By CrashedAgain in forum General Support
Replies: 1
Last Post: 10-07-2003, 11:31 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$248.00

Dell PowerEdge R640 10SFF 2x Gold 6140 2.3GHz 36-Cores 64gb H730p 2x Trays
$599.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00