THUMBDRIVE locking up Knoppix...........why?

[TROLL1357]

......Help I cannot get my Memorex 256mb thumbdrive to work in Knoppix. Everytime I hook it up shortly there after the laptop locks up.............why ? What type of code do I need. Can somebody please help me.

[firebyrd10]

have you tried any other thumbdrive to see if its only that one. Or if its a USB problem. Hwo bout if you boot without it? does it work?

[TROLL1357]

No I have not tried another drive.............I have booted with the drive connected and with out...........its weird I use it on a Windows OS and no problems what so ever.

[softwaretester]

I'm assuming this is a 3.4 issue.
A few people have had problems with 3.4 and the usb. It' s probably not the drive.
Try using 3.3 instead.

[TROLL1357]

Ok where can I obtain this version?

[OErjan]

picka any of the ones below.
http://www.knoppix.net/get.php

[stukennedyuk]

I had a USB smartcard reader lock Linux - it's described here :-

http://www.knoppix.net/forum/viewtop...016&highlight=

In this case it was fixed by changing the driver for the USB controller from usb-uhci to the alternative uhci driver. This supposes that your laptop uses this type of hardware.

Stu.....

[probono]

Please post the output of

dmesg | tail

[softwaretester]

ok.. here's the dmesg and pspci -v for my toshiba satellite 4010CDS.
It's booted up using knoppix 3.4 May 10 using
knoppix26 screen=800x600 noddc noscsi to boot

The instant I put in a USB drive, it slows right down. (in fact, the usb keydrive has been removed, and it's a pain to type this slow)

top

Tasks: 45 total, 3 running, 42 sleeping, 0 stopped, 0 zombie
Cpu(s): 5.9% us, 88.6% sy, 0.0% ni, 0.0% id, 0.0% wa, 5.6% hi, 0.0% si
Mem: 157624k total, 155080k used, 2544k free, 6752k buffers
Swap: 0k total, 0k used, 0k free, 75408k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4 root 15 -10 0 0 0 R 92.6 0.0 16:11.11 events/0
836 knoppix 16 0 36676 25m 29m R 3.6 16.2 0:56.35 kdeinit
595 root 15 0 18884 14m 5704 S 2.3 9.5 0:35.05 XFree86
845 knoppix 16 0 27308 14m 24m S 1.0 9.7 0:06.53 kdeinit
903 knoppix 16 0 2096 1040 1884 R 0.6 0.7 0:00.12 top
834 knoppix 15 0 27424 14m 24m S 0.3 9.7 0:05.23 kdeinit
1 root 16 0 76 76 56 S 0.0 0.0 0:05.31 init
2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
5 root 5 -10 0 0 0 S 0.0 0.0 0:00.01 kblockd/0
6 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
7 root 15 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
9 root 9 -10 0 0 0 S 0.0 0.0 0:00.00 aio/0
8 root 15 0 0 0 0 S 0.0 0.0 0:00.21 kswapd0
11 root 16 0 0 0 0 S 0.0 0.0 0:00.00 kseriod
14 root 25 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
18 root 16 0 0 0 0 D 0.0 0.0 0:00.05 khubd


knoppix@ttyp0[knoppix]$ dmesg
Linux version 2.6.5 (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sat May 1 22:31:22 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 00000000000ec000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009ff0000 (usable)
BIOS-e820: 0000000009ff0000 - 000000000a000000 (ACPI data)
BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
159MB LOWMEM available.
On node 0 totalpages: 40944
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 36848 pages, LIFO batch:8
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f1140
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x09ff0000
ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x09ff0054
ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x09ff002c
ACPI: DSDT (v001 TOSHIB 4000CDT 0x19991008 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0xfe08
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt26.gz nomce BOOT_IMAGE=knoppix BOOT_IMAGE=linux26 screen=800x600 noddc noscsi
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 266.721 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 156392k/163776k available (1816k kernel code, 6804k reserved, 981k data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 524.28 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 767k freed
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium II (Deschutes) stepping 02
per-CPU timeslice cutoff: 1464.17 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf1927, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKA._STA] (Node c9fee6c0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKB._STA] (Node c9fee7c0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKC._STA] (Node c9fee8c0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKD._STA] (Node c9fee9c0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.FDD_._STA] (Node c9f22940), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.COM_._STA] (Node c9f22800), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT_._STA] (Node c9f22680), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT1._STA] (Node c9f225a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PCC0._STA] (Node c9f224a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.SND_._STA] (Node c9f22260), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.ATA_._STA] (Node c9f22f00), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [PIHD] (on)
ACPI: Power Resource [PMHD] (on)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fed00
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x92c6, dseg 0x0
PnPBIOS: Unknown tag '0x82', length '21'.
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
ACPI: No IRQ known for interrupt pin A of device 0000:00:02.0 - using IRQ 255
ACPI: No IRQ known for interrupt pin B of device 0000:00:02.1 - using IRQ 255
ACPI: No IRQ known for interrupt pin D of device 0000:00:07.2
ACPI: No IRQ known for interrupt pin A of device 0000:00:0a.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
vesafb: framebuffer at 0xfe000000, mapped to 0xca80c000, size 2048k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:96e0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag value 0x19 read from CMOS RAM was invalid
Simple Boot Flag at 0x0 set to 0x1
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
SELinux: Registering netfilter hooks
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdcMA, hddio
hda: IBM-DKLA-24320, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA CD-ROM XM-1802D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 8452080 sectors (4327 MB) w/460KiB Cache, CHS=8944/15/63
hda: hda1 hda2 hda3 hda4
hda4: <bsd: hda5 hda6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 15
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S3 S4 S4bios S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: CD-ROM XM-1802D Rev: 1d21
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: No IRQ known for interrupt pin D of device 0000:00:07.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 11, io base 0000ffe0
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: Unknown parameter `sbp2_serialize_io'
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.01
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 29613 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (31 C)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
ACPI: No IRQ known for interrupt pin A of device 0000:00:02.0 - using IRQ 255
Yenta: CardBus bridge found at 0000:00:02.0 [1179:0001]
irq 11: nobody cared!
Call Trace:
[<c010b57a>] __report_bad_irq+0x32/0x8c
[<c010b648>] note_interrupt+0x50/0x78
[<c010b8c9>] do_IRQ+0xf1/0x178
[<c010a068>] common_interrupt+0x18/0x20
[<c0126532>] do_softirq+0x62/0xcc
[<c010b936>] do_IRQ+0x15e/0x178
[<c010a068>] common_interrupt+0x18/0x20
[<c01149f4>] delay_pmtmr+0x0/0x18
[<c01149f5>] delay_pmtmr+0x1/0x18
[<c01c86ea>] __delay+0xe/0x14
[<c01c87a8>] __const_udelay+0x30/0x34
[<cab60459>] yenta_probe_irq+0xb1/0x108 [yenta_socket]
[<cab604dd>] yenta_get_socket_capabilities+0x2d/0x50 [yenta_socket]
[<cab607ac>] yenta_probe+0x1b4/0x208 [yenta_socket]
[<c01ce98c>] pci_device_probe_static+0x2c/0x40
[<c01ce9bf>] __pci_device_probe+0x1f/0x34
[<c01ce9f0>] pci_device_probe+0x1c/0x34
[<c020b6f9>] bus_match+0x31/0x5c
[<c020b7f0>] driver_attach+0x40/0x70
[<c020b9d0>] bus_add_driver+0x5c/0x74
[<c020bc5c>] driver_register+0x34/0x38
[<c01ceb76>] pci_register_driver+0x5e/0x80
[<caa7400a>] yenta_socket_init+0xa/0xe [yenta_socket]
[<c0138c97>] sys_init_module+0x10b/0x22c
[<c01096fb>] syscall_call+0x7/0xb

handlers:
[<caa5f688>] (usb_hcd_irq+0x0/0x58 [usbcore])
Disabling IRQ #11
Yenta: ISA IRQ mask 0x0498, PCI irq 0
Socket status: 30000007
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
ACPI: No IRQ known for interrupt pin B of device 0000:00:02.1 - using IRQ 255
Yenta: CardBus bridge found at 0000:00:02.1 [1179:0001]
Yenta: ISA IRQ mask 0x0498, PCI irq 0
Socket status: 30000011
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco.c 0.13e (David Gibson <[email protected]> and others)
orinoco_cs.c 0.13e (David Gibson <[email protected]> and others)
eth0: Station identity 001f:0001:0006:0004
eth0: Looks like a Lucent/Agere firmware version 6.04
eth0: Ad-hoc demo mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:E0:63:82:8E:E8
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth0: New link status: Connected (0001)
NET: Registered protocol family 17
eth0: New link status: Connected (0001)
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x77, irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Linux agpgart interface v0.100 (c) Dave Jones
version 0 swap is no longer supported. Use mkswap -v1 /dev/hda2
eth0: New link status: Connected (0001)
agpgart: Unsupported Intel chipset (device id: 7192)
agpgart: Unsupported Intel chipset (device id: 7192)
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
usb 1-1: new full speed USB device using address 2
usb 1-1: control timeout on ep0out
knoppix@ttyp0[knoppix]$ lspci -v
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable)

0000:00:02.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 0, IRQ 255
Memory at 10000000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001

0000:00:02.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 0, IRQ 255
Memory at 10001000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001

0000:00:04.0 VGA compatible controller: Chips and Technologies F65555 HiQVPro (rev c6) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: stepping, medium devsel
Memory at fe000000 (32-bit, non-prefetchable)

0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0

0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 1000 [size=16]

0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at ffe0 [size=32]

0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9

0000:00:0a.0 Communication controller: Toshiba America Info Systems FIR Port (rev 23)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 64, IRQ 11
I/O ports at ff80

knoppix@ttyp0[knoppix]$

[softwaretester]

And here's top, (after rebooting, and no USB key triggering events/0 to take up 98% of the cpu.
top - 20:39:33 up 4 min, 0 users, load average: 0.57, 0.60, 0.26
Tasks: 49 total, 1 running, 48 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.3% us, 0.7% sy, 0.0% ni, 98.0% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 157624k total, 154068k used, 3556k free, 7448k buffers
Swap: 0k total, 0k used, 0k free, 76792k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
845 knoppix 15 0 26968 14m 24m S 0.7 9.4 0:02.84 kdeinit: konsole
870 knoppix 17 0 2096 1044 1884 R 0.7 0.7 0:00.57 top
590 root 16 0 18892 14m 5704 S 0.3 9.5 0:10.80 XFree86 -noreset -
1 root 16 0 76 76 56 S 0.0 0.0 0:05.27 init [5]
2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 [migration/0]
3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 [ksoftirqd/0]
4 root 5 -10 0 0 0 S 0.0 0.0 0:00.90 [events/0]
5 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 [kblockd/0]
6 root 20 0 0 0 0 S 0.0 0.0 0:00.00 [pdflush]
7 root 15 0 0 0 0 S 0.0 0.0 0:00.00 [pdflush]
9 root 10 -10 0 0 0 S 0.0 0.0 0:00.00 [aio/0]
8 root 15 0 0 0 0 S 0.0 0.0 0:00.14 [kswapd0]
11 root 16 0 0 0 0 S 0.0 0.0 0:00.00 [kseriod]
14 root 25 0 0 0 0 S 0.0 0.0 0:00.00 [scsi_eh_0]
18 root 17 0 0 0 0 S 0.0 0.0 0:00.00 [khubd]
23 root 20 0 0 0 0 S 0.0 0.0 0:00.00 [khpsbpkt]
100 root 22 0 0 0 0 S 0.0 0.0 0:00.00 [pccardd]
knoppix@ttyp0[knoppix]$