Try hitting Ctrl+D to bring up the "Virtual Machine Control Panel," click on the "Options" tab, click on "Advanced," and make sure the checkbox next to "Disable acceleration" is checked.
I am trying Knoppix-3.4 boot under VMware-4.0 workstation on Windoz-XP box.
I can boot the system when kernel-2.4.26 is used.
I fails when kernel chosen is knoppix26 (2.6.5), is it a known issue? Is there
a work around for this?
Thanks in advance,
-ishwar
Try hitting Ctrl+D to bring up the "Virtual Machine Control Panel," click on the "Options" tab, click on "Advanced," and make sure the checkbox next to "Disable acceleration" is checked.
i read this on french forum :
it's an update
http://ftp.cvut.cz/vmware/vmware-any...pdate65.tar.gz
tar xvzf vmware-any-any-update65.tar.gz
cd vmware-any-any-update65/
./runme.pl
--FYI, they are up to "update67" as of this writing. ( http://ftp.cvut.cz/vmware/vmware-any...pdate67.tar.gz )
--Anybody know if this also applies to vmware 3.x, and not only 4.x?
Originally Posted by pc3

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1499.00
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W
$899.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00