You should start the portmapper before:
sudo portmap
tom
Trying to do an NFS mount using the following command:
sudo mount -t nfs beaky:/mnt/vast /mnt/test
But the command never returns. All other networking seems fine eg. WWW, and I can ssh to beaky. The request is apparently authenticated by beaky, but that's all the info I can see.
Any suggestions, general NFS debugging hints gratefully accepted . . .
TIA,
Ian Smith
You should start the portmapper before:
sudo portmap
tom
Strangely enough, I have _just_ got this working using the command:
/etc/init.d/nfs-common restart
which presumably kicks the portmapper too. Thanks anyway!
BTW, for future reference, I'd suggest the following:
sudo /etc/init.d/portmap start
sudo /etc/init.d/nfs-common start

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge R640 10SFF 2x Gold 6140 2.3GHz 36-Cores 64gb H730p 2x Trays
$599.99
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99