use a knoppix cd to boot from the usb drive.
hello!
i got the following:
pc with usb 2.0
usb drive with 1.5 GB
as my cd-rom drive is very slow i'd like to install the knoppix cd on my USB 2.0 drive
my pc does not boot from usb, so i do need a set of floppys (or better a cd) to boot the kernel (2.6) and mount my usb 2.0 drive
any ideas?
use a knoppix cd to boot from the usb drive.
that's exactly what i've been trying for hours! but how is this done? a knoppix cd boots as default from cd an not from usb?!Originally Posted by Don_PhrostByte
maybe this is a silly question, but i'm an absolutelely knoppix newbie...
Maybe (and I strongly stress maybe) this will work:
http://ftp.us.debian.org/debian/dist...images/floppy/
Get the boot.img. That is actually the boot image for the Sarge installer for Debian and it loads USB drivers..I won't have a chance to try it out myself until next week. There was also a DOS floppy somewhere on the web long ago but I had no luck with it. I'd be curious to know of any results you may have. I *think* there was a Knoppix remaster that had USB boot capabilities but that may have been for USB boot BIOS boxes only.

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...
$324.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$248.00
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93