-
Ethernet help reply
Hi, sorry for reply delay.
I had done lspci (see attach text with lspci + ifconfig eth0 + pump + restarting network).
I must re-configure every time the ethernet card with IP.DNS and gateway (you can see in the attach text that the first time my ethernet card is not recognized, then it is necessary to rewrite the configuration!)
root@box:/home/edgardo# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
0000:00:07.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
0000:00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
root@box:/home/edgardo#
root@box:/home/edgardo# ifconfig eth0 (****note: it is the first time, then it is necessary to rewrite the configuration!)
eth0 Link encap:UNSPEC HWaddr 00-C0-9F-00-00-10-2A-98-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:2 dropped:2 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
root@box:/home/edgardo#
eth0 Link encap:UNSPEC HWaddr 00-C0-9F-00-00-10-2A-98-00-00-00-00-00-00-00-00
inet addr:192.168.0.205 Bcast:192.168.0.205 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:2 dropped:2 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
root@box:/home/edgardo#
root@box:/home/edgardo# pump
Operation failed.
root@box:/home/edgardo#
root@box:/home/edgardo# /etc/init.d/networking restart
Setting up IP spoofing protection: rp_filter.
Reconfiguring network interfaces...done.
root@box:/home/edgardo#
Thanks a lot!
Edgardo
Similar Threads
-
By jjanderson5 in forum Hardware & Booting
Replies: 13
Last Post: 03-24-2005, 11:10 PM
-
By larz in forum General Support
Replies: 5
Last Post: 09-21-2004, 04:55 AM
-
By djief in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 07-12-2004, 01:18 PM
-
By nimsim in forum Networking
Replies: 1
Last Post: 02-11-2004, 01:26 AM
-
By Koji-Kabuto in forum Hardware & Booting
Replies: 6
Last Post: 07-20-2003, 04:51 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Windows XP, Vista, 8.1, Linux Knoppix, Office XP, (6 CDS)
$10.00

KNOPPIX 9.1 Linux Install & Live DVD 32bit & 64bit
$19.99

KNOPPIX USB DVD OS , BEST OF ALL HIGHLY RECOMENDED
$11.99

Knoppix Live GNU Linux System 9.1 on Bootable CD / DVD / USB Flash Drive
$5.99

Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 16G USB Stick
$20.85

Knoppix NSM 1.2
$8.00

VINTAGE SOFTWARE | KNOPPIX STD 0.1 (SECURITY TOOLS DISTRIBUTION)
$7.57

Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 32G USB Stick
$21.42

Hamshack Live DVD-ROM
$7.00

Knoppix 5.0.1 ULTRA RARE Linux DVD - Linux Pro Extra August 2006
$33.98