Results 1 to 4 of 4

Thread: 2004-05-17 boots insanely slow

  1. #1
    Junior Member
    Join Date
    Aug 2003
    Posts
    4

    2004-05-17 boots insanely slow

    For some reason, booting the 2004-05-17 version of Knoppix is very slow on my laptop. Even the Knoppix image above the boot prompt loads slowly like an image on a web page over a dial up connection. When I try to continue booting, the dots that start going across the screen appear at a rate of about one each minute. When I try this same CD in another computer, it boots at a normal speed (some errors pop up later, but I'm more concerned about the boot speed). Other versions of Knoppix boot normally on the laptop. Anyone have any idea as to what would cause this?

  2. #2
    Junior Member registered user
    Join Date
    May 2004
    Posts
    23
    I seem to have the very same issue, although I use the 05-17 version, HDD install.

    It did not do this in the beginning. After some weeks without change (except apt-get upgrade and -update) there was a step during bootup which reads like this:

    Atrating NIS Services... ypbind[binding to yp server... (10 dots appear, one each 30 or so seconds) backgrounded.

    after 3 or 4 minutes the dots at the end of "[binding to yp server....." stop and it reads "backgrounded" at the end of the dotline.

    I have no idea what this may come from. Is there any way to get rid of it again? It has worked perfectly before.

  3. #3
    Junior Member
    Join Date
    Jun 2004
    Posts
    2
    I too had that problem. It appears that when an upgrade is done to the sytem a new form of NIS is installed. This is the ypserver that you see happening. I just removed the NIS package from my computer (not exactly sure what it does but I don't appear to need it) and it now starts up much faster.

    One other thing you could do is to remove the ypserver from your rc.d directories and that should also do it.
    su
    update-rc.d -f ypserver remove
    That should do it I think. You may need to change the name of the file to do so (look in your /etc/rc[0-5].d directories to make sure of the name) but it should stop it from automatically starting up.

    I noticed that a lot of new services began to start up on boot after the upgrade and have been removing them one by one.

  4. #4
    Junior Member
    Join Date
    Jul 2004
    Posts
    3

    Similar problem

    (I also posted this in another thread, but haven't gotten an answer yet)

    Hi.. It's my first day trying linux and I'm having this same problem. I tried searching for the answer based on the comment that ghetto had asked it before and been answered, but I can't seem to find it.

    If it is the NIS that is causing me grief, how do I get to a place to type the apt-get remove nis?

    As ghetto said, I don't get to a prompt.. just goes like normal, then the NIS thing that takes forever, then a black screen/out of range (if I'm on the lcd).

    Thanks in advance!

Similar Threads

  1. my remastered knoppix boots very slow
    By pubo in forum Customising & Remastering
    Replies: 4
    Last Post: 07-07-2005, 08:34 AM
  2. Boots on 1 PC but not on the other ???
    By travlr in forum Hardware & Booting
    Replies: 3
    Last Post: 04-13-2005, 04:57 PM
  3. knoppix only boots to grub!
    By Josh83 in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 04-05-2005, 06:20 AM
  4. knoppix hangs when it boots up
    By ipfreak in forum General Support
    Replies: 2
    Last Post: 09-26-2004, 07:42 PM
  5. Problem - boots, boots.....and so
    By j0x in forum Hardware & Booting
    Replies: 4
    Last Post: 04-01-2003, 12:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM picture

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM

$1499.00



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001 picture

867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001

$245.00



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W

$524.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W

$899.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$308.00



Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD picture

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD

$99.99



RDS CAL - Remote Desktop Services Windows Server 2019 50 User/Device Connections picture

RDS CAL - Remote Desktop Services Windows Server 2019 50 User/Device Connections

$63.00