Knoppix Live 3.4 Startup Problem

[nitaliano]

I'm trying to run Knoppix on an old emachine but it keeps hanging at the same point in the startup. I have to unplug/plugin the machine to get it to reboot. Here's what its spitting out:

Welcome to the KNOPPIX live Linux-on-CD!

Scanning for USB/Firewire devices... Done.
Enabling DMA acceleration for: hda [Maxtor 52049H4]
Enabling DMA acceleration for: hdc [SAMSUNG SLR-3232]
Accessing KNOPPIX CDROM at /dev/scd0...
Total memory found: 191168kB
Creating /ramdisk (dynamic size=147232k) on shared memory... Done.
Creating directories and symlinks on ramdisk... Done.
Starting init process.
INIT: version 2.78-knoppix booting
Running LInux kernal 2.4.26
Processor 0 is M II 2.5x Core/Bus Clock 250MHz

This is where it hangs up.. the cursor stops blinking and i cant do anything. The cd works fine on all my other computers. Any ideas? Thx

[cottlestonpie]

Just to bring similar threads together in the hope that someone knowledgeable will notice there is a problem with 3.4, see this post regarding 3 machines that will not boot 3.4 disks that will boot other machines.

http://www.knoppix.net/forum/viewtop...226fc774bd3b9c