Hi,
I did
apt-get remove lvm10 lvm-common
Martin
This is more a general Linux question than a specifically Knoppix question, but here goes anyway:
During startup the LVM is loaded and, since I have no logical drives set up, it seaches and doesn't find anything. Then, when I shut down, the LVM tries to unmount the non-existant drives and returns an error. I wouldn't be so concerned as it doesn't really affect startup and shutdown times, but every time it returns an error it sends the message to /var/mail/root which is REALLY annoying.
I've already used the SysVinit program that came with KDE to disable PCMCIA, bind9, etc. but I'm a little wary of killing the LVM. Should I be? Since I have no logical drives, disabling the LVM from starting up or shutting down shouldn't be a problem, right?
Hi,
I did
apt-get remove lvm10 lvm-common
Martin
Thanks Martin! I was just wondering if it would adversely affect my system but since you apparently did it without a problem I'll do the same.Originally Posted by horo
You may also have to go into /etc/cron.d/lvw-common and comment out the cron job line.
HTH
rock

Seagate Exos 7E8 4TB 3.5" SAS ST4000NM0025
$22.00
Seagate 14TB Exos X14 7200RPM SATA 6Gb/s 256MB 3.5" Enterprise HDD ST14000NM0408
$354.99
Seagate Exos X16 ST10000NM010G 10TB 7200RPM SAS 12Gb/s 3.5" 512e/4Kn HDD
$199.00
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$69.00
Seagate ST6000NM0115 6TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$159.99
HGST HUS724040ALA640 4TB 7200 RPM SATA 3.5" Internal Desktop Drive 100% Health
$78.00
Seagate Enterprise Capacity 2TB 2.5in SATA Internal HDD ST2000NX0403
$60.00
Seagate Exos X16 16TB ST16000NM001G 7200RPM Enterprise HDD*USED GREAT CONDITION*
$319.79
New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59
Seagate Exos X14 10TB 7200RPM 3.5" SAS 12Gb/s Hard Drive HDD ST10000NM0528
$165.00