-
Partition problem: "Error: expected at least 7 tokens..
Trying to install double-boot with preinstalled Win xp, 250 GB mirror HDD . Current partition (with Partition magic):
50 MB - FAT (Dellutilities) primary, 160GB - NTFS primary, 20 GB - FAT32 logical, ~70 GB - unallocated.
Then I started knx-hdinstall (v 3.3) and got the following after a second dialogue window:
"Error: expected at least 7 tokens for --radiolist, have 5".
Prepartitioning (again with Partition magic) of the empty space as ex2 or ex3 and extra swap partition does not help. cfdisk results in "FATAL ERROR: connot open disk drive" ...
Knoppix runs well from a CD.
What is wrong with this partition and/or installation?
-
Senior Member
registered user
Re: Partition problem: "Error: expected at least 7 toke

Originally Posted by
palex
Trying to install double-boot with preinstalled Win xp, 250 GB mirror HDD . Current partition (with Partition magic):
50 MB - FAT (Dellutilities) primary, 160GB - NTFS primary, 20 GB - FAT32 logical, ~70 GB - unallocated.
Then I started knx-hdinstall (v 3.3) and got the following after a second dialogue window:
"Error: expected at least 7 tokens for --radiolist, have 5".
That's an error from the installer itself. Are you runing the installer from X or run level 2? Try whichever one you've not yet tried. Of course it would be a good idea to get the latest Knoppix if you can.
To get run level 2 at the boot: type
knoppix 2
Prepartitioning (again with Partition magic) of the empty space as ex2 or ex3 and extra swap partition does not help.
Prepartitionig as ext2 or ext3? This makes no sense to me. You cannot partition as ext2 or ext3. You create a partition then you put a filesystem on it. These are two different things.
What is wrong with this partition and/or installation?
From what I've read (nope haven't tried it myself) PM is anything but magic but it does appear to be quite good at hosing up partition tables. Anyway....
cfdisk results in "FATAL ERROR: connot open disk drive" ...
Knoppix runs well from a CD.
Are you running cfdisk as root?
Code:
sudo cfdisk /dev/hda
-
is followed by "command not found"...
Code:
sudo cfdisk /dev/hda
- the same FATAL ERROR,
but returns "Opened disk read-only - you have no permission to write"
Could that be the cause?
May be I indeed need to try 3.4 (though a friend who gave me v.3.3 succedded with that CD)...
Similar Threads
-
By minifat in forum Knoppix DVD
Replies: 3
Last Post: 10-18-2005, 08:51 PM
-
By TaNgO in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 07-26-2004, 11:16 PM
-
By migross in forum General Support
Replies: 4
Last Post: 10-23-2003, 07:56 AM
-
By phillfri in forum Hardware & Booting
Replies: 3
Last Post: 09-26-2003, 01:52 AM
-
By Mad_Max_FX in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-22-2003, 03:29 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Cisco Catalyst 8500 C8500L-8S4X 4x SFP+ 8x SFP 4x10GE 8x1GE Router-Fast Ship
$6299.99

Qty 20 New Cisco QSFP-100G-FR-W2 10-3659-01 Module Hologram Brand New 20 Pack
$260.00

Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New
$101.99

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99

Cisco Catalyst 3850-48F-L 48-Port UPoE Gigabit Switch NM-4-1G
$59.99

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$18.90

New-Cisco/Acacia DP04QSDD-HE0-A1 - 400G QSFP-DD ZR+ High Tx Power Optics Module
$7500.00

Cisco ISR4331 Intergrated Service Router K9 4300series
$45.99

Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch
$46.99

Cisco Catalyst 2960x (WS-C2960X-48FPD-L) 48 Port POE Rack Mount Switch Brand New
$399.99