As a rule you can't install software to a live cd but there have been some strides made in that direction. There is kilk (do a search) but it only works w/ KDE.
Boot like so:
knoppix fromhd=/dev/hda1 myconfig=scan
How do I install programs in Knoppix, and and at the boot menu how do I put in more then 1 command? Do I do it this way "knoppix fromhd=/dov/hda1, knoppix myconfig=scan"?
As a rule you can't install software to a live cd but there have been some strides made in that direction. There is kilk (do a search) but it only works w/ KDE.
Boot like so:
knoppix fromhd=/dev/hda1 myconfig=scan
no i told it the command "knoppix tohd=dev/hda1" so it runs off the hd. That way i can save stuff right?
Use knoppix-installer from root and follow directions.
The key is to set up a persistent home. All installed programs get saved to the persistent home with Klik. Set up the PH, restart, and use a cheatcode to tell the live CD where to look for the PH. Then install the apps using Klik (or do it the hard way, as long as you're saving to PH. This might help:Originally Posted by Fuel
http://www.knoppix.net/forum/viewtopic.php?t=11856
jd

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99