Do you have a firewall?
Did you test a ftp-connection?
Hi,
i got my Prism54 to work just fine with Knoppix3.6 HD-Install (Debian).
Kernel2.6.7 and a self-compiled 2.6.8 show both following strange (to me at least) behaviour:
Every time i try to load a web-page in Mozilla or any other browser i can only see the message "resolving host-name" for about 30seconds.
THEN the page is displayed just fine.
This wait comes again every time i click on a link!!!!!
ping works just great to the same web-server. (100ms)
So the DNS structure should be ok.....
i use static ip-adress 192.168.0.40
Gateway and DNS: 192.168.0.1 (my Netgear router)
Broadcast: 192.168.0.255
Anything that i forgot to configure correctly in order for the DNS to work correctly in conjunction with the web-browsers?
Samba connections work just fine.
On WinXP the web-page loading works just great.
THX for ANY help
Do you have a firewall?
Did you test a ftp-connection?
maybe you need to change mtu.
add the mtu value to your /etc/network/interfaces:
ex:
address xxxxxx
netmask xxxxxx
network xxxxxxx
broadcast xxxxxxx
mtu xxxx
![]()
![]()
![]()
![]()

Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5" 4-BAY 32GB RAM No OS 2x 495w
$174.95
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell Poweredge R720 8SFF 2.5" 2x Xeon E5-2680 v2 2.8GHz 20-Cores 64gb 4x Trays
$259.99
Dell R640 Diskless Servers 2x Gold 18-Cores 6254 3.10GHz CPU, 32gb RAM, No Raid
$699.00
Dell Poweredge R720 8SFF 2.5" x Xeon E5-2680 v2 2.8GHz 20-Cores 128gb 4x Trays
$349.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w
$359.99
Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU
$315.00
Dell Poweredge T420 SFF 2x E5-2430 v2 2.5Ghz / 64gb / H710 / 8x Trays / 2x 495w
$394.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99