Boot your pc, look carefully at what bios reported, is is reporting your memory is 512MB. Sometime, memory module just got loose from it slots and only able to read less.
Hello all,
I've just got a copy of Knoppix 3.4 but I'm having problems booting. While booting I recive a message saying "Couldn't Start KDEint. Check your installation!". Instantly after this message I recive another saying that I do not have enough memory.
I've had a look at the FAQs and found mention of the second error but the answer for this involved creating a swap file. This doesn't seem approiate as I have 512MB memory (32 is used by onboard graphics).
I have tried typing "knoppix mem=480M" but this has no effect.
Anyone able to help?
Cheers,
Benedict
Boot your pc, look carefully at what bios reported, is is reporting your memory is 512MB. Sometime, memory module just got loose from it slots and only able to read less.
I think I've found the problem. I ran 'knoppix testcd' and this reported an error in the file 'knoppix\knoppix'. I tried coping this file to my HD in Windows but it failed. Seeing this is file is 678MB I guess that's what's causing the problem.
Benedict

Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
Western Digital 2TB WD2003FYYS-02W0B0 3.5" SATA 7200RPM Hard Drive
$43.00
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95
Western Digital Blue (7200RPM, 3.5", SATA III, 64MB Cache) 1TB HDD
$19.90
HGST HUS724040ALA640 4TB 7200 RPM SATA 3.5" Internal Desktop Drive 100% Health
$78.00
Seagate ST6000NM0115 6TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$159.99
HITACHI ULTRASTAR 2TB 7.2K 6G 3.5INCH SATA HDD HUS724020ALA640 | TESTED WIPED
$34.95
Western Digital 1TB 3.5" SATA III 7200RPM Desktop Hard Drive
$34.99
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99