Here are my results of: cdrecord -scanbus *and* cat /proc/scsi/scsi
Also, when I modprobe scsi_mod I get: not found, and when I modprobe ide-scsi I get nothing!
Thanks for your interest and help on this.

Matt


knoppix@ttyp0[knoppix]$ cdrecord -scanbus
Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[email protected]>.
The original author should not be bothered with problems of this version.

Linux sg driver version: 3.5.30
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'YAMAHA ' 'CRW-F1E ' '1.0c' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'IOMEGA ' 'ZIP 100 ' '03.H' Removable Disk
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
scsibus2:
2,0,0 200) 'HL-DT-ST' 'DVDRAM GSA-4040B' 'A300' Removable CD-ROM
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *
scsibus3:
3,0,0 300) 'LEXAR ' 'JUMPDRIVE ' '1.20' Removable Disk
3,1,0 301) *
3,2,0 302) *
3,3,0 303) *
3,4,0 304) *
3,5,0 305) *
3,6,0 306) *
3,7,0 307) *
knoppix@ttyp0[knoppix]$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: YAMAHA Model: CRW-F1E Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: 03.H
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: DVDRAM GSA-4040B Rev: A300
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: LEXAR Model: JUMPDRIVE Rev: 1.20
Type: Direct-Access ANSI SCSI revision: 02
knoppix@ttyp0[knoppix]$ su
root@ttyp0[knoppix]# modprobe scsi_mod
FATAL: Module scsi_mod not found.
root@ttyp0[knoppix]# modprobe ide-scsi