After doing modprobe imm and mount -t vfat /dev/sda4 /mnt/zip then does it show up as being mounted. Here is what was done again to get it mounted:

root@0[knoppix]# mount
/dev/hda3 on / type ext3 (rw,errors=remount-ro)
/proc on /proc type proc (rw,nodiratime)
/dev/pts on /dev/pts type devpts (rw)
/sys on /sys type sysfs (rw)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
automount(pid1044) on /mnt/auto type autofs (rw,fd=4,pgrp=1044,minproto=2,maxproto=4)
/dev/hda1 on /mnt/hda1 type ntfs (rw,nosuid,nodev,umask=000,uid=1000,gid=1000)
root@0[knoppix]# chgrp floppy /mnt/zip
root@0[knoppix]# mount -t vfat /dev/sda4 /mnt/zip
mount: /dev/sda4 is not a valid block device
root@0[knoppix]# cd /mnt/zip
root@0[zip]# mount -t vfat /dev/sda4 /mnt/zip
mount: /dev/sda4 is not a valid block device
root@0[zip]# ll /mnt/zip
total 0
root@0[zip]# modprobe imm
root@0[zip]# mount -t vfat /dev/sda4 /mnt/zip
root@0[zip]# mount
/dev/hda3 on / type ext3 (rw,errors=remount-ro)
/proc on /proc type proc (rw,nodiratime)
/dev/pts on /dev/pts type devpts (rw)
/sys on /sys type sysfs (rw)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
automount(pid1044) on /mnt/auto type autofs (rw,fd=4,pgrp=1044,minproto=2,maxproto=4)
/dev/hda1 on /mnt/hda1 type ntfs (rw,nosuid,nodev,umask=000,uid=1000,gid=1000)
/dev/sda4 on /mnt/zip type vfat (rw)

Not sure about the deluser thing yet. Do I deluser knoppix root when I'm in root? Don't quite understand the group and user thing. What is that setting? Permissions.

After it is mounted:

root@0[zip]# ll /mnt/zip
total 4
-rwxr--r-- 1 root root 4079 Feb 15 1995 readme.txt

Can you walk me through the deluser? I added ithe modprobe imm to that boot.sh file here:

# Save kernel messages in /var/log/dmesg
#
dmesg > /var/log/dmesg
# This was added by Ryan
modprob imm
 Is this correct