Recently got Knoppix_V3.4 (2004.05.17) live CD.

It does not recognize my dial-up modem.

It responds "KPPP Cannot find modem /dev/modem".

(The modem IS recognized and DOES work with LindowsCD 4.0.471 and with LinspireLiveCD 4.5.453;
both of them seem to have the "same" dial-up tool as is on the KnoppixCD 3.4.).

Here's what I get when I "Query Modem" in the Kppp dial-up tool in Lindows:

Lindows Query Modem Results:

ATI: 56000
ATI1: Smart Link 56K Voice Modem unknown Version 2.7.14
ATI2: Smart Link Ltd Version 2.7.14
ATI3: unknown Smart Link compatible modem
ATI4: Active Profile [copied/pasted **see below]
ATI5: Stored Profile 0: Not defined
ATI6: Stored Profile 1: Not defined
ATI7: Serial Number: 0 Protocol Factor: 0

**
Active Profile: S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=128 S11=100 S12=050 S13=000 S14=001 S15=001
S16=001 S17=000 S18=000 S19=000 S20=000 S21=000 S22=000 S23=000 S24=050
S25=000 S26=000 S27=008 S28=000 S29

Here are console results:

result about modem from lspci (when on LindowsCD)
00:14.0 Modem: Smart Link Ltd.: Unknown device 3052 (rev 03)

result about modem from lspci -n (when on LindowsCD)
00:14.0 Class 0703: 163c:3052 (rev 03)

result about modem from lspci -v (when on LindowsCD)
00:14.0 Modem: Smart Link Ltd.: Unknown device 3052 (rev 03) (prog-if 00 [Generic])
Subsystem: Unknown device 1688:0811
Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
Memory at eb001000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ec00 [size=256]
Capabilities: [80] Power Management version 2

Any ideas will be greatly appreciated...Thanks!