I want to get my scanner working properly but do not know the first step in the process, or the next step or ... I have a hd install debian style ver 3.4. Any help would be appreciated.

rrfish@rrfish72:~$ lspci -v
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
Subsystem: Asustek Computer, Inc.: Unknown device 8070
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: f4000000-f5efffff
Prefetchable memory behind bridge: f5f00000-f7ffffff

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f2800000-f3ffffff

0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
Flags: bus master, medium devsel, latency 0

0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0
I/O ports at b800 [size=16]

0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b400 [size=32]

0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: medium devsel, IRQ 5
I/O ports at e800 [size=16]

0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b000 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 05)
Subsystem: Asustek Computer, Inc.: Unknown device 806a
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at a800 [size=256]
I/O ports at a400 [size=64]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 0239
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Memory at f6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at f5ff0000 [disabled] [size=64K]
Capabilities: <available only to root>

0000:02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
Subsystem: Intel Corp. EtherExpress PRO/100 VE
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at f3800000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d800 [size=64]
Capabilities: <available only to root>

0000:02:09.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 04) (prog-if 10 [OHCI])
Subsystem: Risq Modular Systems, Inc.: Unknown device 5811
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at f3000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

0000:02:0b.0 Communication controller: Lucent Microelectronics LT WinModem (rev 02)
Subsystem: Risq Modular Systems, Inc.: Unknown device 044e
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f2800000 (32-bit, non-prefetchable) [disabled] [size=256]
I/O ports at d400 [disabled] [size=8]
I/O ports at d000 [disabled] [size=256]
Capabilities: <available only to root>

It is at USB hub #1. Says it is loaded during boot. What entry do I add to fstab if any and how do I access the device? Can I just run the install disk?