Hello all,

i can ping the DNS-servers with windows 98. So I think that there the problem is.
The network is a university cable network and I am provided with IP and the other settings by the computer center.

Here are some outputs of some commands from a Knoppix support page:

vi /etc/network/interfaces:
# /etc/network/interfaces -- configuration file for ifup(, ifdown(

# The loopback interface
# automatically added when upgrading
auto up eth0
iface up inet loopback

iface eth0 inet static
address 132.195.145.11
netmask 255.255.255.0
network 132.195.145.0
broadcast 132.195.145.254
gateway 132.195.145.254
----------------------------------------------------------
angi@Nemo:~$ ifconfig
eth0 Protokoll:Ethernet Hardware Adresse 00:07:95:26:78:26
inet Adresse:132.195.145.11 Bcast:132.195.145.254 Maske:255.255.255.0
inet6 Adresse: fe80::207:95ff:fe26:7826/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:524 errors:0 dropped:0 overruns:0 frame:0
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:68445 (66.8 KiB) TX bytes:4490 (4.3 KiB)
Interrupt:11 Basisadresse:0xd400

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:820 (820.0 b) TX bytes:820 (820.0 b)
-----------------------------------------------------------------
angi@Nemo:~$ route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
132.195.145.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
-----------------------------------------------------------------

Do you need some other information?
Greetz, Stephan