Results 1 to 5 of 5

Thread: a nice way to install Knoppix, but...

  1. #1
    Junior Member
    Join Date
    Sep 2004
    Posts
    1

    a nice way to install Knoppix, but...

    Hi guys, I was curious about Linux and found this site:
    http://unit.aist.go.jp/it/knoppix/win/index-en.html
    it lets me install Knoppix on Windows partition and access it with Grub.
    Did anybod else try this?
    I have a small problem: it automates everything at the beginni till end and don't give me boot prompt. I need boot prompt to access and restore my Persistent Home thingy saved in my usb flash drive. Can I fix this somehow? Much appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    Portland, OR USA
    Posts
    568
    Yes, I tried it. It works well.

    In order to restore your persistent home thingy off your flash drive thingy when you boot this custom Knoppix thingy, you just have to go into Windows and edit GRUB's configuration file thingy, which is C:\boot\menu.lst, with your favorite text editor thingy.

    Look for the thingy...I mean the line in menu.lst that looks like this --
    Code:
    kernel /KNOPPIX/linux26 knoppix_dir=/KNOPPIX knoppix_name=KNOPPIX init=/etc/init lang=us hda=scsi hdb=scsi hdc=scsi hdd=scsi vga=791 ro
    -- and put "home=/dev/sda1" (without the quotes) on that line anywhere after "init=/etc/init", save the file, boot into Knoppix with your USB thingy attached, and that should do it.

    You can also put other cheatcode thingys in that line, like "noapm".

  3. #3
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Southern Maine, US
    Posts
    274
    Is there anything like this for Win98?

  4. #4
    Member registered user
    Join Date
    Sep 2004
    Posts
    78
    Is their a 3.6 version for this?

  5. #5
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674
    Quote Originally Posted by Kowood
    Is there anything like this for Win98?
    Quote Originally Posted by Jameson
    Is their a 3.6 version for this?
    Yes. Look at this forum:
    http://www.knoppix.net/forum/viewtop...r=asc&start=20
    You can load and run GRUB from dos, using GRUB.EXE. You can run it from the config.sys (device=grub.exe) ot from the autoexec.bat (grub.exe). But do not load emm386.exe before starting grub. Then you should have a directory called boot in the root of c:/ and a file menu.lst within this directory with the parameters and cheatcodes required to start knoppix (kernel, ramdisk, home, ...) And obviously you need to have the kernel, ramdisk, and knoppix loop back file (700mb) within your fat16/fat32 partition. It works great for me and with 3.6 as well...
    Enjoy, Gilles

Similar Threads

  1. Replies: 1
    Last Post: 09-08-2005, 08:39 PM
  2. Knoppix is very nice, but I forced to switch back to win xp
    By wilson001 in forum Hardware & Booting
    Replies: 14
    Last Post: 01-25-2005, 05:25 AM
  3. win doesn't play nice with my knoppix hd install :(
    By paradox_4 in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 12-18-2004, 10:19 AM
  4. A Nice DV Editor
    By aay in forum Tips and Tricks
    Replies: 5
    Last Post: 10-30-2003, 06:05 PM
  5. Replies: 11
    Last Post: 02-24-2003, 04:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Lot of 100 Genuine Cisco 10-3105-01  SFP-10G-SR-S  Transceiver w/ Hologram picture

Lot of 100 Genuine Cisco 10-3105-01 SFP-10G-SR-S Transceiver w/ Hologram

$320.90



Lot of 20 Cisco SFP-10G-SR  10-2415-03 Transceiver Module picture

Lot of 20 Cisco SFP-10G-SR 10-2415-03 Transceiver Module

$50.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



For Cisco SFP-10G-T-X Module, 10G SFP to RJ-45 Copper, 10GBase-T, 1/2.5/5/10Gbps picture

For Cisco SFP-10G-T-X Module, 10G SFP to RJ-45 Copper, 10GBase-T, 1/2.5/5/10Gbps

$39.99



SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



Cisco SFP-10G-SR Transceiver picture

Cisco SFP-10G-SR Transceiver

$4.00



Cisco SFP-10G-SR-S SFP+ 10-3105-01 MMF Transceiver Module/Hologram. picture

Cisco SFP-10G-SR-S SFP+ 10-3105-01 MMF Transceiver Module/Hologram.

$6.00



Cisco SFP-10G-LR 10Gb 40Km Long Range Transceiver Hologram in Clamshell * 1 unit picture

Cisco SFP-10G-LR 10Gb 40Km Long Range Transceiver Hologram in Clamshell * 1 unit

$45.00



30PCS Sealed Cisco SFP-10G-SR 10GBASE-SR SFP+ Transceiver Module MMF 850nm 300m picture

30PCS Sealed Cisco SFP-10G-SR 10GBASE-SR SFP+ Transceiver Module MMF 850nm 300m

$499.99



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99