Haven't this Q answered in your previous post?![]()
As i know, the knoppix software is using the CD to run the Linux, how come i still need a least 2GB in the Harddisk???
is it after i used the 2GB to install the knoppix and i wish to run it by using the CD, then i can delete the 2GB file inside my PC n still can operate the Knippix?????
Thank you for anyone who help me
Haven't this Q answered in your previous post?![]()
You only need 2G on your partition IF you wish to install Knoppix to your hdd. You do not need any hdd at all to run Knoppix from cd.Originally Posted by ck_lee
If you installed Knoppix to hdd then it lives in the 2G partition that you created for it. Do not delete this partition or anything in it or your installation will be gone. You may still run Knoppix from cd but realize that it is completely different than running Knoppix from your hdd. They are 2 seperate operating systems.is it after i used the 2GB to install the knoppix and i wish to run it by using the CD, then i can delete the 2GB file inside my PC n still can operate the Knippix?????
Thank you for anyone who help me

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 - 4X S25G NICs
$1999.97
Lot of 3 Dell PowerEdge Blade Server HHB005 x2 HHB006 x1
$256.49
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08
LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00
Dell PowerEdge VRTX Rackmount Chassis w/4x PSUs 2x CMC Modules
$399.98
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60