To keep your icons the way they were:
chmod 0 /usr/bin/mkdesktophdicons
Yesterday I installed Knoppix to a HD partition, but as it was 3.2, it could only run the outdated knx-install command. Therefore, I had difficulty getting my partition icons onscreen like I am used to with live-cd knoppix. I didn't want to download the newest Knoppix image, but noticed that I had a copy of Overclockix (complete with install-knoppix command) handy.
So I put that on a partition and it works great. There are a couple problems, though, which I would be grateful if somebody could help me with.
First, I like to clean up my desktop and only keep three drive icons on it (my Windows C partition, my E partition which I use as download/mp3 storage, my Linux partition and my CD-ROM) - the others (I have a number of other partitions) are rarely used. I put these other icons into a "Misc" folder on my desktop and everything is nice and neat. The problem is, when I reboot, all of the icons are recreated! How can I stop this?
Also, on one of my networked computers (horrible E-Machines with onboard Intel graphics with a Samtron 75V monitor), it always loads up with an undesirable resolution (1152xI-Forget-Exactly). The computer isn't endowed with lots of RAM, so I want it to run at a quicker 800x600 res. When I change the res, though, it doesn't properly redraw the desktop (I lose the taskbar and a large chunk of the rest of the desktop!). I think, "OK, I need to reboot and it'll draw the desktop properly." Sure enough, when I reboot, it goes right back to 1152x???. Is there any way to actually save my configuration changes?
I noticed as well that all of my Firefox tweaks (I close the Bookmarks taskbar, make yahoo my home page, etc) all disappear, too.
I have a feeling that this can all be fixed with minimal effort, but I just don't know what to do!
Thanks for any help,
Dave
To keep your icons the way they were:
chmod 0 /usr/bin/mkdesktophdicons
Okay, I figured out how to save the config for the resolution (it's now at a much better 800x600).
I still have the problem where everything I do gets lost when I reboot (ie. Mozilla Firefox settings and bookmarks, the USBMouse, SMBMount icons and "Release Notes" file keep getting put back on the desktop after reboot). I want them moved to a "Misc" folder on the desktop so they don't add to clutter. I tried running that chmod line that was offered by another user here, but it didn't help me...
Is there some way I can turn off the autoconfig? Everything's configured the way I like it, I'm not adding any new hardware... I just want to make changes to fonts and whatnot and not lose them every time I reboot!
Please help a newbie who's down on his luck,
Dave
Just another note, I have made sure that my drives are not marked "read only". Is there a possibility that my Firefox directory is still read only? That would seem to explain why it won't save my bookmarks or home page upon reboot.
Dave

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge R630 Server 2x E5-2667 V4 = 36 Cores H730 32GB RAM 2x 900GB SAS
$784.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99