Results 1 to 2 of 2

Thread: "/dev/modem" link disappears at reboot of hdd inst

  1. #1
    Junior Member
    Join Date
    Sep 2004
    Location
    Italy
    Posts
    3

    "/dev/modem" link disappears at reboot of hdd inst

    Hello everybody
    A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
    I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
    I was suggested to:
    "The next time you reboot, it should suffice to only create the Ports
    # mknod /dev/ttySHSF0
    # ln -sf /dev/ttySHSF0 /dev/modem"
    But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
    At this point I guess the real problem is Knoppix and not the drivers...
    Any suggestions on how to make the link persistent?
    Regards
    Artikid

  2. #2
    Senior Member registered user
    Join Date
    May 2003
    Posts
    981

    Re: "/dev/modem" link disappears at reboot of hdd

    Quote Originally Posted by artikid
    Hello everybody
    A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
    I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
    I was suggested to:
    "The next time you reboot, it should suffice to only create the Ports
    # mknod /dev/ttySHSF0
    # ln -sf /dev/ttySHSF0 /dev/modem"
    But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
    At this point I guess the real problem is Knoppix and not the drivers...
    Any suggestions on how to make the link persistent?
    Regards
    Artikid
    Is only the link /dev/modem disappearing or is /dev/tty/SHSF0 being removed also?
    /dev/modem is probably being removed by this section of the /etc/init.d/knoppix-autoconfig script:
    Code:
    # Delete obsolete links and files before starting autoconfig
    if ! checkbootparam "nohwsetup"; then
    rm -f /dev/cdrom* /dev/cdwriter* /dev/mouse* /dev/modem* /dev/scanner* \
          /etc/sysconfig/i18n /etc/sysconfig/keyboard /etc/sysconfig/knoppix \
          2>/dev/null
    fi
    so the simplest solution would seem to be to edit the script to remove this deletion.
    However, this MAY cause problems. I have done a similar 'fix' to prevent /dev/cdrom from being removed which seemed to work OK with 2.6 kernel but resulted in an additional /dev/cdrom being created each time the 2.4 kernel was run until I had about 10 of them.
    I think what is needed is an additional startup script to run as the last boot script which checks for /dev/modem & creates one only if there is not one existing.
    Also, /etc/init.d/knoppix-autoconfig is only used for a knoppix or beginner style HD install, for a Debian install I'm not sure what the startup script is.

Similar Threads

  1. Replies: 5
    Last Post: 06-12-2008, 01:07 AM
  2. "KPPP Cannot find modem /dev/modem"
    By wsg in forum Hardware & Booting
    Replies: 23
    Last Post: 10-23-2004, 12:06 PM
  3. USR 56k PCI modem "busy"/"not found",rec
    By oman in forum General Support
    Replies: 0
    Last Post: 08-03-2004, 06:44 PM
  4. For the web forum : a "my threads" link
    By beforewisdom in forum Ideas
    Replies: 2
    Last Post: 04-21-2003, 09:28 PM
  5. Locate Knoppix "group" in "K" menu
    By Juny in forum General Support
    Replies: 4
    Last Post: 03-14-2003, 09:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS picture

Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS

$179.98



Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS picture

Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS

$239.99



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA picture

Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA

$350.48



INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU picture

INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU

$11.00



Genuine Intel Xeon W-2145 3.70Ghz  8 Cores LGA2066 CPU SR3LQ Tested USA SELLER  picture

Genuine Intel Xeon W-2145 3.70Ghz 8 Cores LGA2066 CPU SR3LQ Tested USA SELLER

$94.94



Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS picture

Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS

$84.49



DELL Precision 5820 Workstation Xeon W-2123 3.6ghz/NO RAM/NO SSD/P400 Vid picture

DELL Precision 5820 Workstation Xeon W-2123 3.6ghz/NO RAM/NO SSD/P400 Vid

$139.99



Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor   picture

Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor

$50.00



Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00