-
"/dev/modem" link disappears at reboot of hdd inst
Hello everybody
A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
I was suggested to:
"The next time you reboot, it should suffice to only create the Ports
# mknod /dev/ttySHSF0
# ln -sf /dev/ttySHSF0 /dev/modem"
But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
At this point I guess the real problem is Knoppix and not the drivers...
Any suggestions on how to make the link persistent?
Regards
Artikid
-
Senior Member
registered user
Re: "/dev/modem" link disappears at reboot of hdd

Originally Posted by
artikid
Hello everybody
A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
I was suggested to:
"The next time you reboot, it should suffice to only create the Ports
# mknod /dev/ttySHSF0
# ln -sf /dev/ttySHSF0 /dev/modem"
But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
At this point I guess the real problem is Knoppix and not the drivers...
Any suggestions on how to make the link persistent?
Regards
Artikid
Is only the link /dev/modem disappearing or is /dev/tty/SHSF0 being removed also?
/dev/modem is probably being removed by this section of the /etc/init.d/knoppix-autoconfig script:
Code:
# Delete obsolete links and files before starting autoconfig
if ! checkbootparam "nohwsetup"; then
rm -f /dev/cdrom* /dev/cdwriter* /dev/mouse* /dev/modem* /dev/scanner* \
/etc/sysconfig/i18n /etc/sysconfig/keyboard /etc/sysconfig/knoppix \
2>/dev/null
fi
so the simplest solution would seem to be to edit the script to remove this deletion.
However, this MAY cause problems. I have done a similar 'fix' to prevent /dev/cdrom from being removed which seemed to work OK with 2.6 kernel but resulted in an additional /dev/cdrom being created each time the 2.4 kernel was run until I had about 10 of them.
I think what is needed is an additional startup script to run as the last boot script which checks for /dev/modem & creates one only if there is not one existing.
Also, /etc/init.d/knoppix-autoconfig is only used for a knoppix or beginner style HD install, for a Debian install I'm not sure what the startup script is.
Similar Threads
-
Replies: 5
Last Post: 06-12-2008, 01:07 AM
-
By wsg in forum Hardware & Booting
Replies: 23
Last Post: 10-23-2004, 12:06 PM
-
By oman in forum General Support
Replies: 0
Last Post: 08-03-2004, 06:44 PM
-
By beforewisdom in forum Ideas
Replies: 2
Last Post: 04-21-2003, 09:28 PM
-
By Juny in forum General Support
Replies: 4
Last Post: 03-14-2003, 09:02 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Lot of 88GB (22x4GB) ADVANTECH 1RX16 DDR4 PC4-2400U AQD-D4U4GN24-HP MEMORY RAM
$286.00

Netac DDR4 32GB 16GB DDR4 3200MHz UDIMM C16 Desktop Internal Memory RAM Kit
$99.99

Samsung M393A2K43DB3 16GB (1x16GB) RAM DDR4 3200MHz M393A2K43DB3
$89.99

A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$21.68

Major Brand 16GB (2x8GB) PC3-12800U DDR3-1600MHz DDR3-12800 DESKTOP RAM NON-ECC
$29.99

Lot 43 Mixed Brands Micron MT16KTF1G64HZ-1G6N1 8GB 2Rx8 PC3L-12800S-11-13-F3 RAM
$649.99

VisionTek 64GB (2x32GB) DDR4 SO-DIMM Laptop RAM 260-Pin DDR4-3200
$240.00

HP Kingston HyperX Fury RGB 16GB (1x16GB) DDR4 RAM 3733MHz HP37D4U1S8ME-16XR
$79.99

Micron 32GB 1x32GB DDR5 5600 CL46 ECC Unbuffered SO-DIMM MTC20C2085S1TC56BD1
$399.00

ADATA XPG Spectrix White RGB AX4U320038G16-BW41 32GB DDR4 matching set of 8GB
$149.99