I'm not really understanding what you want here. Do you want to make a iamge of a disk? (partimage) Do you want to make a perfect copy? (dd) What?Originally Posted by helios17
Since using linux, I have finally got an installation that would kill me if I lost it...and trust me, the old linux saying, "if it aint broke, fix it till it is." is my mantra. I am looking for a program that allows me to do a disk by disk copy with the first disk being bootable. I have apt-cache searched and even installed a couple of them but they look a bit complex for my simple noob mind. Does anyone have a preference for both ease and function?
thanx
helios
I'm not really understanding what you want here. Do you want to make a iamge of a disk? (partimage) Do you want to make a perfect copy? (dd) What?Originally Posted by helios17
boot an alternative linux that don't mount your "beloved" system then do a dd.
I continue to advice people to use loopback file system even for a HD installation. This will make future backup easier.
'Disk by disk' copy...do you mean the equivalent of a master installation disk?Originally Posted by helios17
This certainly should be possible, all 'normal' (ie not 'run from CD') distros do it but I've never seen a how to. I'm sure it involves more than a simple disk copy since at the very least you would have to create an install script which would boot up a mini system then install the applications etc to your target computer. One problem with just a straight disk copy would be that it would have the hardware setup for the source computer only.
How big is your system? If you are 2 Gig or under you might be able to make a single disk 'remaster'. This can be done from a 'Knoppix style' HD install but might not work for a 'Debian' or 'beginner' style install. On the other hand, it just might work, only a year or so ago remastering from a HD install was just a pipe dream.
Check with the How-to http://www.knoppix.net/docs/index.ph...HDInstallHowTo & see if you can make the big Knoppix compressed file system. If this goes OK, add a 'toHD' install somewhere on you system, then replace the 'KNOPPIX' file on your 'toHD' install with your new one & see if it will run. If so, proceed to make your iso & burn the CD.
If it won't run or if it is too big to fit on a CD, it still may be useful as a backup, you could store it somewhere secure on your system. If you need to restore, "just uncompress & restore your system". I've put this in quotes because I don't know if it will work & haven't any idea how to do it (sorry).
I have two 16 gb partitions on the same drive. One is my active knoppix system and the other is available for backup. I want to protect my ( at the moment !) working system from my LINUX stupidity by using dd to copy
hdb1 to hdb2. If I boot from a knoppix cd willl
dd if=/dev/hdb1 of=/dev/hdb2
do the job. After I break my working system I plan to boot the cd
and do the dd again
dd if=/dev/hdb2 of=/dev/hdb1
Corrections , suggestions and/or criticisms very welcome
Thanks
Hei
IF you also have XP on your system (and sufficient funds) I would invest in Acronis 'True Image' (requires Nero 'InCD'). It has saved my life quickly and simply on several occasions!
You can do disk to disk backup/restore to/from a hidden zone or disk to dvd.
In fact its about the only thing I use XP for now...
regards
Did the dd from hdb1 to hdb2.... appeared to work. Took 90 minutes.
Can access everything on hdb2. Haven't tried to go back...
more to come
the comandshould work about as well.Code:cp -ax / /mount_ point_of_hdb2
that wil just copu everything from hda1 to hda2 while preserving all filepermisions... then after copying it back just rerun lilo and enjoy
GaTk,
About the only flaw I can see in your backup scheme is,
Since you are backing up from hdb1 to hdb2, this may save you if, say the hdb1 partition goes crazy and you get it "mucked up", but, in the case where you have a complete hard drive failure, i.e. hdb goes out on you, you have your original and backup on the same drive.
For a quick restore, you may want to use that hdb2 partition, for ease, and availability, but, a long term solution, you may want to include "off storing" that hdb2 to some other drive, or media, as a complete backup scheme. That way, if you need to quickly restore a single file, or the complete install, hdb2 is right there for use. In the case of a complete drive crash, you have the "fall-back" of a "off stored" hdb2 backup as well... Just some thoughts![]()
rsync is your friend.

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1499.00
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W
$899.99
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00
867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99