-
After 1 year: slomotion boot
Hello,
my GF's Mom has a AMD 1 GHz 128 MB RAM wich was running with a Knoppix HDD install (3.1) without any trouble.
After a year it suddenly took approx. ten minutes or longer to boot. Nothing has changed neither hadware nor software. Its basicly a modern typewriter with internet-browser
Unfortunetly the TFT-Display did not support any modes of the boot-up sequences so we tried booting from CD, both knx 3.4 & 3.6.
The boot was also very slow and after HDD installation of those versions the same Problem accured.
Now we finaly managed to get a CRT monitor. Everything is going pretty slow- the things it remains at the longest:
-RAM disc: compresd image found at block 0
-calculating module dependencies (lots of lines refaring to moduls.dep and many more. also it displays: hint: insmod errors can becaused by incorrect module parrameters/invalid io or irq)
when booting from CD its stopping especelly long at:
"CD unable to locate rsdp"
Now I am not a linux expert, I'm just one of those who are able to get Knoppix installed on the harddrive, that's about it.
So I am pretty clueless and I wold aprecheate any help to avoid installing windows. Thanks
-
Senior Member
registered user
There is only 3 things I can think of:
1) Check memory...test mem option using cd. I doubt this is the problem.
2) Check hardisk for bad block or hardisk error. This is more likely the problem. I had similar problem, took me >10 min just to boot cd. After doing some scanning....I found the evil...>1000 bad blocks.
3) Could be the hardisk is full.
Good luck
Similar Threads
-
By WaKa in forum The Lounge
Replies: 1
Last Post: 10-01-2005, 05:45 AM
-
By chris-harry in forum Games
Replies: 13
Last Post: 01-03-2005, 02:30 AM
-
By chris-harry in forum The Lounge
Replies: 2
Last Post: 01-03-2005, 02:27 AM
-
By ILoveChessAndCompScience in forum The Lounge
Replies: 1
Last Post: 01-21-2004, 06:22 PM
-
By Ritchie in forum The Lounge
Replies: 3
Last Post: 12-25-2003, 02:35 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97

Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU
$197.76

Datto S3P6000 4x 3.5" 1U Blade Rack Server Intel Xeon D-1541 @2.10GHz 48GB DDR4
$154.76

Cisco UCS B200 M4 2x Xeon E5-2680 v3 2.5GHz = 24C/48T. CPU's Included, No RAM/HD
$36.99

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD
$349.99

Supermicro 938-16 16-LFF MicroCloud SuperServer 5038MR-H8TRF *No Blade Servers*
$159.99

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$174.99