-
Cant use my hda
ive got two hd one is hda which is a fat32 partition and the second is hdc which is an ntfs partition that has my Windows, when i boot it detects both hd. now the problem is my hda which is my fat32 partition becomes a swap partition and is not mounted. im using this partition as a data partition in windows and im planning of using it also in knoppix. help
-
Junior Member
registered user
You need a boot manager. If you have two hds, then running a dual boot system is easy with GAG... See:
http://gag.sourceforge.net/
Install GAG and keep all windows stuff one one drive and all linux syuff on another. If this means transfering your data from your FAT32 system to your other drive, do it. What GAG does is mount on the first section of eitehr drive. Then it gives you the option as to what system to boot.
What I did is first install Windows fresh on hda, then I installed linux (knoppix) fresh on hdb. After that, I installed GAG on hda... Voila!
Hope this helps
-
-
Junior Member
registered user
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP ProLiant BL460c Gen9 DUAL E5-2690v3 DDR4 ECC 2x CADDY NO DRIVES NO MEMORY/RAM
$30.00

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$95.20

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99

Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU
$197.76

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD
$349.99

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$174.99