-
Senior Member
registered user
KnoppixCD boot with 3GB of ram...toram..experiment(success)
With 3Gb physical ram installed, I installed the Knoppix CD with:
Knoppix26 toram myconfig=scan (previous install of config)
The result was an install of the CD toram in about 4 minutes. The " system guard" reported a total of 2.21GB of free ram.
A side issue in this experiment.
I had previously set up a USB HDD of 80GB with qtparted to have 4 primary partitions, 40MB ext2, 2GB linux swap, 2GB linux swap, 4GB ext2 and the remainder free.
The effect of this HDD was to supply a total of 4GB of swap to the knoppix CD install which was reported in " system guard" along with the memory figures.
I am booted in this mode at this time with the CD removed from the computer, the "C" drive powered down, the floppy drive powered down, and only one USB HDD powered up (external).
The 4GB partition contains a Knoppix DVD KNOPPIX file which permits the boot of the Knoppix 3.4 CeBit remaster ..toram... when the DVD is loaded in the CD/DVD reader. This provides 4GB of swap but only some 900MB of free memory. It loads in kernel 2.6.3 whereas the CD loads kernel 2.6.5. There are 4.9GB of program material provided in the DVD format (Limited by the legacy of inherent isolinux limits).
One experiment conducted with the system as loaded into ram involved transferring a 300MB file from desktop to a directory created called RAM1. The file transferred at 200MB/sec, thus confirming the true install ..toram..of all data.
My system is athlon1900+ having 3GB of 2100DDRAM.
Examining the characteristics of loading additional data into the memory via file transfer from external sources suggests that the new data drives the memory content already present in physical ram into the swap area (slower, due to USB interface in my system).
I invite comment on this apparent characteristic of memory management. Thus the new data appears in physical ram, and if enough is added, swap begins to build (slower).
I have just begun studying what might happen next, with Linux...anything!
Admittedly, using the "C" drive for swap and Knoppix loading would provide higher speed but this arrangement left my system in pristine condition while the experiment was performed.
I expect to try installing the USB HDD as "C" HDD and compare performance.
Similar Threads
-
By aay in forum Tips and Tricks
Replies: 18
Last Post: 11-02-2006, 02:18 AM
-
By mlap in forum Customising & Remastering
Replies: 35
Last Post: 04-18-2005, 09:21 AM
-
By lilsirecho in forum Knoppix DVD
Replies: 0
Last Post: 10-03-2004, 01:45 AM
-
By lilsirecho in forum The Lounge
Replies: 0
Last Post: 09-04-2004, 12:52 AM
-
By AzureD in forum General Support
Replies: 4
Last Post: 03-27-2004, 03:20 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

VINTAGE 1984 FUJITSU 5.25" SCSI HARD DRIVE B03B-4805-B003A untested
$124.99

5x Vintage SSS SCP1802D SCP1802LD Ceramic CPU 1802 COSMAC 1978 Gold IC
$299.99

Vintage NMB Technologies RT8255CW+ Mechanical Wired Keyboard - Tested
$74.95

Vintage MICRON DESKTOP PC 133MHz Pentium - SEE BioS SCREEN PICS
$475.00

Vintage IBM Data Processing Magnetic Tape Reel General Electric Data Cartridge
$30.00

Vintage Digital VR241-A color CRT monitor, powers on, DEC Rainbow or terminal
$185.00

Vintage 1982 Mattel Aquarius Home Computer System 5931 Tested and Working
$160.00

Vintage UltraStor 803-45288-00C SCSI Host Adapter Controller Card Rare U34F
$200.00

VINTAGE UMPC Fujitsu Lifebook P1120 8.9" Touchscreen Crusoe 800MHz - Windows XP
$349.95

Vintage Telecom ATT Circuit Board 4k RAM Memory Gold Cap IC Western Electric
$199.99