Installing to multiple HDs

[medicinecrow]

I have installed Knoppix 3.6 to the hard Drive. However, i wanted to have my /home directory on a separate HD. The Knoppix Installer will allow me to format the Hard Driives but I cannot seem to get it to install my /home directory on the second HD.

How can I get my /home directory to the other HD and how can I mount Fat 32 HD that i have my Music on....?

[mzilikazi]

Simple. Read my howto.

[medicinecrow]

I'll give it a try and let you know.

Thanks...

[medicinecrow]

BTW - Am I correct in assuming that I will have to reinstall or can I do this from my current installation?

[Markus]

You don't need to reinstall, just do:
mkdir /mnt/newhome
mount /dev/hdaX /mnt/newhome (where X is the new partition)
cp -a /home/* /mnt/newhome/
mv /home /oldhome (you can delete the oldhome later)
umount /mnt/newhome
mount /dev/hdaX /home
edit /etc/fstab to mount /home , this is what I have:
/dev/hdb6 /home ext3 rw,auto,users,exec 0 0

[OErjan]

that was almost good, you only forgot to add a new /home dir. but a minor mistake (although the errormessage might be mislesding to a mewcommer to linux)
the way I would do to is.
[quote]mkdir /mnt/newhome
mount /dev/hdaX /mnt/newhome (where X is the new partition)
cp -a /home/* /mnt/newhome/
mv /home /oldhome (you can delete the oldhome later)
umount /mnt/newhome
mkdir /home <--- here is the change
mount /dev/hdaX /home
edit /etc/fstab to mount hdaX as /home , this is what I have:
/dev/hdb6 /home ext3 rw,auto,users,exec 0 0[quote]
i added the large red letters and the line comented with

<--- here is the change

but now it should work.
and a small coment that in hdaX the a "x" is the partition number, and that the "a" might be another letter on his system, sorry if i am nitpicking.
OErjan

[Markus]

Ah, thanks, but perhaps mkdir /home instead of /mnt/home....?
But you're right, I could be a bit more verbose from time to time

[OErjan]

thanks! edited it

[medicinecrow]

Tried everything here...several times...every time a different error came up...nothing consistent...more trouble than ist worth...

thanks

[Markus]

What's the error?
Did you set permissions on the new /home?
This explains how to do it from the live-CD: http://www.knoppix.net/docs/index.ph...PartitionHowTo