-
USB drive problem
Hi, I tried to use my usb thumb disk on my Debain 2.6.9. I added the following in the /etc/fstab
/dev/sda1 /home/linw/usbkey vfat users,owner,rw,umask=000 0 0
but I got the following after I run: mount -a
mount: /dev/sda1 is not a valid block device
Can anyone help me to fix that?
command from lspci:
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
and that is modules:
w@debian:~$ lsmod
Module Size Used by
snd_mixer_oss 19968 0
ipv6 261568 17
af_packet 22536 2
snd_via82xx 27684 0
snd_ac97_codec 72208 1 snd_via82xx
snd_pcm 97608 1 snd_via82xx
snd_timer 25604 1 snd_pcm
snd_page_alloc 9928 2 snd_via82xx,snd_pcm
gameport 4544 1 snd_via82xx
snd_mpu401_uart 7872 1 snd_via82xx
snd_rawmidi 25060 1 snd_mpu401_uart
snd_seq_device 8072 1 snd_rawmidi
snd 57188 8 snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,s nd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_devic e
pci_hotplug 34160 0
via_agp 9536 1
floppy 60176 0
tsdev 7616 0
mousedev 11480 2
psmouse 21832 0
pcspkr 3560 0
evdev 9472 0
uhci_hcd 32592 0
usbcore 118564 3 uhci_hcd
via82cxxx_audio 30152 0
uart401 11716 1 via82cxxx_audio
sound 83244 2 via82cxxx_audio,uart401
soundcore 10272 3 snd,via82cxxx_audio,sound
ac97_codec 18508 1 via82cxxx_audio
ne2k_pci 9312 0
8390 10624 1 ne2k_pci
crc32 4224 1 8390
parport_pc 37188 0
parport 41416 1 parport_pc
agpgart 34472 1 via_agp
nls_iso8859_1 3968 2
nls_cp437 5632 2
vfat 14528 2
fat 46560 1 vfat
md 48332 0
capability 4488 0
commoncap 7040 1 capability
ide_cd 42464 0
cdrom 40540 1 ide_cd
rtc 12664 0
ext3 125672 1
jbd 63256 1 ext3
mbcache 9092 1 ext3
ide_generic 1344 0
via82cxxx 13916 1
ide_disk 20480 5
ide_core 141936 4 ide_cd,ide_generic,via82cxxx,ide_disk
sd_mod 17808 0
ata_piix 9092 0
libata 45252 1 ata_piix
scsi_mod 125132 2 sd_mod,libata
unix 28468 240
fbcon 40064 0
font 8256 1 fbcon
vesafb 6688 0
cfbcopyarea 3904 1 vesafb
cfbimgblt 2944 1 vesafb
cfbfillrect 3520 1 vesafb
w@debian:~$
Thanks
-
Senior Member
registered user
Try modconf at knosole as root, then goto the scsi drive part and choose the imm or ppa or both and enter through to install these modules. If that does not work then you have to find the correct module to install from that list. Not in linux right now so I can't give you the exact listing of the scsi drive module but that part is in what you're looking for. Good luck.
Similar Threads
-
By kennmurrah in forum MS Windows & New to Linux
Replies: 3
Last Post: 03-01-2006, 10:09 AM
-
By Bluebones in forum Hardware & Booting
Replies: 2
Last Post: 10-22-2005, 06:35 AM
-
By melo016 in forum Hardware & Booting
Replies: 5
Last Post: 11-13-2003, 07:56 PM
-
By CoolSilver in forum Hardware & Booting
Replies: 7
Last Post: 06-01-2003, 04:38 AM
-
By ReaLity in forum General Support
Replies: 1
Last Post: 04-13-2003, 06:37 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$439.00

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99

Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New
$101.99

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99

Cisco Catalyst WS-C2960X-48FPD-L 48-Port Gigabit Managed PoE+ Ethernet Switch
$69.99

Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch W/ 2x PSU, 2x Power Cords
$205.00

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40

Cisco Catalyst WS-C3560CX-8PC-S Managed Switch 8 PoE+ Port | Quantity Available
$97.49

CISCO INDUSTRIAL SWITCH IE-3100-8T2C-E New
$1049.00

Cisco Catalyst WS-C2960+24TC-S 24-Port Gigabit Managed SFP Switch
$39.99