Results 1 to 4 of 4

Thread: Live CD looses configurations

  1. #1
    Junior Member
    Join Date
    Jan 2005
    Posts
    2

    Live CD looses configurations

    Hello all,

    I'm just getting started on Linux and I'm now exploring Knoppix 3.7 Live CD.

    I'm running into some dificulties. Everytime I change some of the configurations, either the Language of the keyboard, add some bookmarks on Firefox, etc... the next time I boot it, I have to configure it again.

    Is there anyway of keeping the configurations on my HDD, while running Linux from CD?

  2. #2
    Junior Member
    Join Date
    Jan 2005
    Posts
    3
    I'm a newbie as well, so you may not want to listen to me

    I created a separate partition formatted in ext2 (I'm booting knoppix from an iso on an NTFS partition), this is where I have created a persistent home and where I save my knoppix configuration to.

    Once you have this partition (I think it can be another hdd (or the same but different partition), fdd, usb key etc), click the penguin-->Configure-->Create a Persistent Knoppix home directory. Walk through the few steps, then make a few changes to your liking and choose the Penguin-->Configure-->Save Knoppix Configuration.

    Reboot and make sure to use the codes to scan for your home and config, or explicitly define where they are ie /dev/uba1 etc

    Hope this helps.

  3. #3
    Junior Member
    Join Date
    Jan 2005
    Posts
    8
    You need to either make a persistant home directory (on a thumbdrive etc) or install Knoppix to HDD.

  4. #4
    Junior Member
    Join Date
    Jan 2005
    Posts
    2
    Quote Originally Posted by Aaron
    I'm a newbie as well, so you may not want to listen to me

    I created a separate partition formatted in ext2 (I'm booting knoppix from an iso on an NTFS partition), this is where I have created a persistent home and where I save my knoppix configuration to.

    Once you have this partition (I think it can be another hdd (or the same but different partition), fdd, usb key etc), click the penguin-->Configure-->Create a Persistent Knoppix home directory. Walk through the few steps, then make a few changes to your liking and choose the Penguin-->Configure-->Save Knoppix Configuration.

    Reboot and make sure to use the codes to scan for your home and config, or explicitly define where they are ie /dev/uba1 etc

    Hope this helps.
    On the contrary. Thank you very much for your excellent solution. I'll do it right away.

Similar Threads

  1. monitor looses signal from graphics card during boot
    By techno-mole in forum Hardware & Booting
    Replies: 7
    Last Post: 02-02-2007, 01:38 AM
  2. Knoppix configurations
    By Jahkaral in forum MS Windows & New to Linux
    Replies: 5
    Last Post: 02-12-2006, 02:09 PM
  3. Kdrive configurations?
    By Nosman in forum General Support
    Replies: 0
    Last Post: 05-20-2004, 03:24 AM
  4. different configurations
    By Alexxx in forum Customising & Remastering
    Replies: 1
    Last Post: 02-21-2004, 06:37 PM
  5. knoppix 3.2 floppyconf looses HD
    By andrei in forum General Support
    Replies: 0
    Last Post: 07-23-2003, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



New Dell PowerEdge Server R360 Xeon E-2488 3.2G 16GB RAM 4X800GB SSD 6x600GB SAS picture

New Dell PowerEdge Server R360 Xeon E-2488 3.2G 16GB RAM 4X800GB SSD 6x600GB SAS

$3890.00



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$308.00



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$381.93



Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700 picture

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700

$289.99



Dell Poweredge C4130 2x LGA2011-3 1U 4x GPU Rackmount Server CTO (NO CPU/NO RAM) picture

Dell Poweredge C4130 2x LGA2011-3 1U 4x GPU Rackmount Server CTO (NO CPU/NO RAM)

$299.95



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD

$169.99