-
Knoppix 3.7 WLAN PCMCIA Problem
I have tested the newest version of Knoppix with my Notebook. Looks good but i can not use my PCMCIA WLAN card (Orinoco 802.11b/g Silver). It should be run on kernel 2.6 i think. I have not tested it with kernel 2.4. If i want to configure it with the integrated WLAN cofigurator it says no wlan adapter found or something like that. Can someone help me please? Please very simple because Iam a noob in this. THX
-
Junior Member
registered user
I'm running Knoppix 3.7 on a Dell latitude CPXI . I have an Orinoco B/G Gold card that I use with Windows, but it won't work with Linux . My research indictaes that there is only one WIFI card driver currently supported by linux, and that's something called the Lucent/Orinoco driver.. This driver is used in about a dozen pcmcia cards, but they are all "B" cards. The end result was that I went to Ebay and bought an Orinoco Classic Gold "B" card for $30, and that work's fine. These cards are also available new from an outfit called Fleeman Anderson & Bird (FAB) in Florida. When I got the new pcmcia card, I made no entries in WLan or any other internet program, knoppix saw the card and my unencrypted Linkys wireless router and set the card up automatically. I can see the card working in the Wavemon program.If you have made entires in Wlan in an attempt to get your B/G card working, that may prevent the "B" card from scanning.. I couldn't figure out how to reset Wlan, so I had to reinstall Knoppix (90 min job...not bad compared to Windows )
Your other alternaitve is to write a driver for the new B/G cards.
-
i had similiar issues regarding an orinoco 8460 a/b gold card. nothing but windows acknowledged it. i went on ebay and found an orinoco 8480-US and the ONLY distro is works off the bat is knoppix 3.7. I tried various other versions of *nix distro's and was unable to get the card to work. it uses the atheros chipset
-

Originally Posted by
rgarden
. My research indictaes that there is only one WIFI card driver currently supported by linux, and that's something called the Lucent/Orinoco driver.. This driver is used in about a dozen pcmcia cards, but they are all "B" cards.
Lots of cards are supported under linux. Right now I'm running a Linksys 54g card. I use ndiswrapper and the windows drivers. Do a google for ndiswrapper and you will find several howtos
Similar Threads
-
By DaSilva in forum Networking
Replies: 1
Last Post: 01-12-2005, 09:05 PM
-
By spoonman in forum German Forum
Replies: 0
Last Post: 12-13-2004, 09:57 PM
-
By dl5raz in forum Networking
Replies: 3
Last Post: 09-16-2004, 09:25 PM
-
By onimeno in forum Networking
Replies: 4
Last Post: 09-03-2004, 06:19 PM
-
By manzikki in forum Networking
Replies: 0
Last Post: 12-18-2003, 01:47 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)
$399.95

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$381.93

Dell PowerEdge R240 Intel Xeon E-2144G 3.6GHz 16GB DDR4 ECC NO HDD 250W
$149.00

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server
$349.99

Dell PowerEdge R740 8B SFF CTO Barebone H330 QP 1GbE NDC 2x 750W PSU No CPU/Mem
$395.00