I recently added another IDE drive to my system with the intent of moving the home directory to it so I can get some isolation from my system disk. Although the new drive is recognized, I end up with several messages about "dma timer expiry". After about 4 retries, the boot continues and the login prompt appears. I've found that if I remove the new drive and change the bios to indicate that it is not there, all is well. Also, if I boot from the CD, I don't get these messages and the drive is properly seen. I suspect if I were to reinstall Knoppix, everything would be set up fine, but I have spent a fair amount of time configuring and updating my system to simply trash it and restart. Does anyone have any ideas what might be causing this? I"m suspecting a configuration file of some sort, but being new to Linux, I can't seem to find the answer. Any help would be most appreciated. Thanks.

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99
Cisco Meraki MA-SFP-1GB-SX Network Tranceiver Module
$89.00
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50
HPE 560SFP 2x 10Gb SFP+ PCIe Both Profile Network Card 669279-001 665247-001
$14.90
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
Dell Mellanox ConnectX-4 Lx CX4121C Dual 25GbE SFP28 LP | 20NJD
$25.00
HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99
New Open Box Lot of (5) Genuine Cisco SFP-10G-SR-S 10Gig Transceivers 10-3105-01
$84.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00
HP 557SFP+ ETHERNET 10GB 2 PORT 792834-001 788991-001 HIGH LOT OF 10
$70.00