--There is a FAQ about setting up Knoppix CD as FTP server:
http://sourceforge.net/docman/displa...group_id=70773
--Here also is my info:
http://www.knoppix.net/forum/viewtopic.php?t=362
Originally Posted by little sumo
As i use Knoppix as a rescue cd for various pc's, i tried to transfert files with a parallel cable.
So ,i set up a plip connection betwenn 2 pc's, they could ping each other, but i would like to transfer files with scp or something like (better with a GUI)
Thanks
--There is a FAQ about setting up Knoppix CD as FTP server:
http://sourceforge.net/docman/displa...group_id=70773
--Here also is my info:
http://www.knoppix.net/forum/viewtopic.php?t=362
Originally Posted by little sumo
Thanks for your reply, but my ftp settings seem to be ok: when i try a ftp seesion with eth0, there is no problem.
Is there a config where i should say ftp, to lesson on plip0 instead of eth0?
Regards.
--Hmm... Sounds like a routing issue to me, and route commands are beyond my ken.
Originally Posted by little sumo

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$248.00
Dell PowerEdge R640 10SFF 2x Gold 6140 2.3GHz 36-Cores 64gb H730p 2x Trays
$599.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...
$324.99
Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99