Hi all,
I hope someone here can help me with my USB problem, I spend already hours on this, googling for usb and linux, but haven't found a working solution so far:
I don`t get my USB devices to work. They seem not to be recognized by Knoppix, though kernel modules are loaded:
lsmod:
:
usbserial 19676 0 [visor]
usb-storage 62016 0 (unused)
usb-uhci 21836 0 (unused)
usbcore 57824 1 [visor usbserial usb-storage usb-uhci]
Am I right that usb devices (usb stick or Palm) should be mounted automatically by the system? Or do I have to mount them manually? I tried (without success): mount -t vfat /dev/sda1 /mnt/usbdevfs or mount /proc/bus/usb/ /dev/usbdevfs.
My system is: HP Omnibook 4150 with USB 1.0, Knoppix 3.7 (HD installed) with Kernel 2.4.27
Any help is appreciated!
Best regards
britt

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99
LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00
Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R
$399.00
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08