-
Junior Member
registered user
Getting rid of CD-Rom Noise
Is there any way to reduce the noise from the CD-Rom drive when running Knoppix from CD?
I've been running it off my 52x CD-Rom and the noise is almost unbearable.
However when i boot it from an old P133 with a 8x CD-Rom, you can hardly hear any noise at all from the CD, it runs very quiet (although pretty slow).
Is it possible to decrease the speed at wich Knoppix accesses the CD? Like downclock the CD-Rom from 52x to 8x?
I really wouldnt mind the speedloss as long as I can get rid of the noise.
-
Senior Member
registered user
Re: Getting rid of CD-Rom Noise

Originally Posted by
mithrill
Is there any way to reduce the noise from the CD-Rom drive when running Knoppix from CD?
As far as I know, there is not throttling software available under Linux. Under MS-DOS, there's SlowCD: http://www.ibsensoftware.com/files/SlowCD104.zip, which does come with asm-source.
Your other two options are to try burning a couple more discs (maybe other brands) that might be better-balanced, or find a Samsung CD-ROM drive; as far as I know, that's the only brand that has dynamic balancing. It's easy to tell which Samsung drives have this feature. They use steel shot for this, so the drives rattle when tilted or shaken (gently).
-
Senior Member
registered user
Re: Getting rid of CD-Rom Noise
Code:
hdparm -E1 /dev/hdX
"hdparm -E" sets the the CD-ROM drive speed (DVD works also), I haven't found out if numbers correspond with speed (24x, 32x) numbers. -E3 is inaudible fast enough for DivX playback on my machine (48x12x48x CD-ReWriter).
-
Junior Member
registered user
noise
I tried "hdparm -E2 /dev/hdc" but i get an error, it says:
"/dev/hdc:
setting cdrom speed to 2
CDROM_SELECT_SPEED failed: Input / output error."
Is this maybe a feature only supported on some CD-Roms?
I also tried setting it to other speeds than 2 but still same error.
-
Senior Member
registered user
Re: noise

Originally Posted by
mithrill
I tried "hdparm -E2 /dev/hdc" but i get an error, it says:
"/dev/hdc:
setting cdrom speed to 2
CDROM_SELECT_SPEED failed: Input / output error."
Is this maybe a feature only supported on some CD-Roms?
I also tried setting it to other speeds than 2 but still same error.
Yes, could well be.
btw, did you have a CD in the drive? I have only tested with a CD inserted.
-
Junior Member
registered user
noise
yeah, i had a CD in the drive, it's the drive that i'm booting/running Knoppix on.
Well, guess i'll be taking a look at thouse samsung cd-roms with noise reduction.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Netac DDR4 32GB 16GB DDR4 3200MHz UDIMM C16 Desktop Internal Memory RAM Kit
$99.99

A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$21.68

Major Brand 16GB (2x8GB) PC3-12800U DDR3-1600MHz DDR3-12800 DESKTOP RAM NON-ECC
$29.99

DDR4 Laptop RAM 4GB 8GB 16GB 32GB 2400 2666 3200 Samsung Hynix
$66.00

Samsung 16GB LPCAMM2 PC5 7500 DDR5 LPDDR5X CAMM2 M561K1LC4DM0-CCTGM RAM Memory
$189.00

ADATA XPG Lancer Blade RGB 32GB (2x16GB) DDR5-6000 CL30 Desktop RAM Black
$429.94

RAMAXEL Lenovo 32GB LPDDR5X CAMM2 7500MHz Laptop RAM | UNTESTED
$445.00

Crucial DDR3L 16GB 2 x 8GB 1600 MHz PC3L-12800 Laptop RAM Sodimm Memory 1.35V
$41.00

NEW IN BOX - Corsair Vengeance RGB 32gb (2x16gb) DDR6200 CL36 CMH32GX5M2B6200C3
$550.00

Micron 32GB 1x32GB DDR5 5600 CL46 ECC Unbuffered SO-DIMM MTC20C2085S1TC56BD1
$399.00