only thing i can think of is maybe a dns issue.
what does ifconfig show in knoppix and what does ipconfig /all show in windows if you use windows.
Running Knoppix 3.7 Live CD on A Dell Inspiron 8100 laptop
with a D-link DWL-G650(pcmcia) connecting to a Dlink DI-624(router).
I can ping the router and I can access it thru Konqueror browser,
BUT, I can't browse any sites!!!
I am a newb, what am I missing????
Encryption = off.
ESSID:" yes,it's okay"
Access Point: ok.ok.ok.ok.ok.ok
MODE: managed
Frequency = 2.417ghz
Bit Rate= 36mbs
Tx-Power=off
Sensitivity=0/3
Retry=off
RTS thr=off
Fragment thr=off
Power Management=off
Link Quality=48/94
Signal Level=47dbm
Noise Level= -95dbm
Rx invalid:0
Rx invalid crypt:0
Rx invalid frag:0
Tx excessive retries:0
Invalid misc:0
Missed beacon:0
tHANKS
only thing i can think of is maybe a dns issue.
what does ifconfig show in knoppix and what does ipconfig /all show in windows if you use windows.
Pureone here is the info. X = CENSORED
ath0 Link encap:Ethernet HWaddr XX.XX.XX.XX.XX.XX
inet addr: 192.168.0.XXX Bcast: 192.168.0.255 Mask: 255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Rx packets:407 errors:686 dropped:0 overuns:0 frame:686
TX packets:34 errors:0 droppped:0 overruns:0 carrier:0
collisions:0 txqueue:199
RX bytes:35975 (35.1 KiB) TX bytes:3252 (3.1KiB)
Interrupt:10 Memory:e0c62000-e0c72000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueue:0
RX bytes:600 (600.0b) TX bytes:600 (600.0b)
Windows info:
WINDOWS IP CONFIGURATION
Host name = XXXXXXXXXX
Primary suffix =
Node type = Hybrid
IP routing enabled=no
WINS Proxy enabled=no
DNS Suffix Search list= XXXXXXX.XXX.COM
ETHERNET adapter WIRELSS NETWORK CONNECTION 1:
Connection-specific DNS suffix XXXXXXX.XXX.COM
Description= D-link Airplus Xtreme G DWL-650 ADPTER #2
Physical address = XX-XX-XX-XX-XX-XX (note, same hw address reported in ifconfig)
DHCP ENABLED=YES
AUTOCONFIG ENABLED=YES
IP ADDRESS= 192.168.0.XXX (note,different IP address reported in ifconfig)
Subnet Mask= 255.255.255.0
Default gateway = 192.168.0.1
DHCP server = 192.168.0.1
DNS servers = 192.168.0.1
Lease obtained Feb XX,2005
Lease expire Feb XX,2005
Thanks in advance.
B0SC0
make sure you set the dns in knoppix unless your using pump -i wlan0.
does it say host can not be found. or does it say connection timed out? when trying to browse the web.
I am using pump -i ath0
I beleive it said host can't be found.
I guess what really cooks my noodle is that I can access and ping the router with
no problem. So that tells me the link from the laptop to the router is okay.
B0SC0

Crucial MX500 1TB 2.5" SATA III Internal SSD CT1000MX500SSD1
$99.99
Samsung 2.5" 870 EVO SSD SATA III 250GB 500GB 1TB Internet Solid State Drive Lot
$90.00
Netac 2TB 1TB 512GB 256GB Internal SSD 2.5inch SATAIII Solid State Drive lot
$1090.00
Samsung 860 EVO 250GB SSD MZ-76E250 2.5" SATA III Solid State Drive -
$39.99
Samsung 256 GB Internal SATA SSD Fully Tested 50%-79% Health
$24.00
2 PACK 128 GB SSD M.2 2280 SATA Solid State Drive Major Brands, Samsung, LiteON
$28.00
Fanxiang 256GB 512GB 1TB 2TB 4TB SSD Lot 2.5'' SATA Internal Solid State Drive
$42.99
Fanxiang 1/2/5/10Pcs 2.5'' SATA SSD Lot 1TB 2TB 4TB 512GB 256GB TLC Internal SSD
$129.99
Netac 120GB 256GB 1TB 2TB Internal SSD 2.5'' SATAIII 6Gb/s Solid State Drive lot
$119.99
SSD 2.5" SATA Hard Drive for Laptop Desktop Windows 10 pro 64 Pro Pre-installed
$42.00