-
Enabling telnetd on Knoppix CD
I have a need to use telnet to access a system that boots to a customized Knoppix CD. I need to remaster the CD so that telnetd will be available.
I have done the following:
-- added the following line to inetd.conf:
Code:
telnet stream tcp nowait root /usr/sbin/tcpd in.telnetd
-- used the command:
Code:
update-inetd --enable telnet
-- made sure the following line is in /etc/services:
The CD is set to get an IP address via DHCP. Is there anything I am missing to make this work?
Thanks.
Acer0001
Similar Threads
-
By ken39 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 11-09-2007, 05:05 AM
-
By vinlouis in forum General Support
Replies: 2
Last Post: 09-29-2005, 02:41 AM
-
By Josef in forum Networking
Replies: 5
Last Post: 01-26-2005, 02:46 PM
-
By helios17 in forum General Support
Replies: 1
Last Post: 11-21-2004, 01:11 AM
-
By beforewisdom in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 04-14-2003, 07:38 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

IBM System X3850-X5 Server w/4x Intel Xeon E7-4870 CPU , 512 GB DDR3 RAM,NO HDD
$1299.99

IBM QRadar xx29 2x Xeon E5-2650v4 2x 900W PSU M5120 12x 3.5" Bay Server No RAM
$179.99

Unused IBM 09P0037 MAINBOARD For RS/6000 7044-170 P-Series
$375.00

IBM 43W0331 System x3550 Server Board LGA771 DDR2 16 DIMM RJ-45
$49.00

IBM SYSTEM X3500 M3 SERVER 7380AC1 TOWER Server XEON E5620 8GB RAID SEE NOTES
$108.92

IBM Power S824 12Bay 4U Server - 2x Power8 CPU, 512GB DDR4, MT: 8286-42A
$1731.00

IBM 02YC027 Seagate ST2400MM0129 2.4TB 10K SAS 12Gb/s 2.5" Server Hard Drive
$200.00

Compaq ProLiant 1500R 5/100 rack server, Series 3155, with IBM 2.1GB HD, VINTAGE
$295.00

IBM ADP Server Type 7870 AC1 NO HDD | 128GB RAM PC3L | 2 x Xeon E5620
$199.99

Rare Vintage IBM 93ZZ PowerPC Server Board - MCM Ceramic CPU - 40N1844 - 1.1 lbs
$49.99