Results 1 to 6 of 6

Thread: fscked permissions?

  1. #1
    Junior Member
    Join Date
    Mar 2005
    Posts
    3

    fscked permissions?

    I have a laptop which I formally had knoppix installed on, after I got a stable server up and running on a main box i found how useless it was to have knoppix on that laptop.. I went to delete it and for some stupid reason used partitiion magic to just delete the nix partition.. which I believe is where I made the mistake. When i rebooted it still boots to lilo but won't let me boot into linux obviously. I've tried resizing and redistributing the newly avaiable hard drive space with partition magic again, and when I try it gives me this error

    -------------------------------------
    Error 501 while executing Batch.


    Error 501: Cross-linked files were found

    Will now reboot
    Press Any Key to COntinue.
    ---------------------------------------

    I've considered reinstalling and doing a clean uninstall of nix, but its cd-rom is also physically dead in the water. I do how ever have a floppy drive, but not quite sure what to do, I'm sure there will be a few flames saying bla bla boot disk fix lilo.conf but I'm a bit in the dark as of the exact operation of that. Half my life working on computers, and all I got was this stupid error =\. I don't think I've left any information out, but I could be wrong.. multitasking is fun.. How ever I will be greatly appriciate of any help or advise any one has to offer, and of course my sincerest gratiitude to all who even wasted their time reading =)

  2. #2
    Member registered user
    Join Date
    Jan 2005
    Location
    Oregon
    Posts
    44
    just rewrite your MBR. Whichever OS you plan to install on the laptop in knoppix's stead should already have a tool for doing such a thing (hell, Even winXP bootCD has that option)

  3. #3
    Junior Member
    Join Date
    Mar 2005
    Posts
    3
    That would be all well and good, if i could put in a cd.. but I can't thus the problem

  4. #4
    Senior Member registered user
    Join Date
    Feb 2005
    Location
    Colorado, USA
    Posts
    205
    What else is on the laptop - some flavor of Windows with PM installed? Can you boot to that?

    It sounds like if you ran scandisk in Windows you'd find a bunch of hosed files there. Is there anything on that drive that you need to save?

    -- Ed

  5. #5
    Junior Member
    Join Date
    Mar 2005
    Posts
    3
    I can back it up easily, i have a 120 main server but thats not the problen.. i can't get the hard drive space that used to be taken up by nix, to be allocated anywhere else.. cant use a cd to reinstall anything.. due to the no cd thing.. but yes theres a windows xp home version on it.. with PM, but im not sure quite what to do to get things back into order..

  6. #6
    Senior Member registered user
    Join Date
    Feb 2005
    Location
    Colorado, USA
    Posts
    205
    Back up what you want, or can. Data are more important than programs, which can be re-installed. If you need to back up programs, copy the registry too. Some of the data may be corrupted, but you can sort that out later.

    Run scandisk - just check for data integrity, not the physical media. This should "fix" the crosslinked-files errors (by eliminating them as recognizable files). Then try Partition Magic again.

    Let us know if that works, okay?

    -- Ed

Similar Threads

  1. My vista install got fscked, how do i ftp my files over
    By jacksonon in forum MS Windows & New to Linux
    Replies: 3
    Last Post: 04-05-2007, 01:47 AM
  2. dd permissions with live cd
    By OpinionatedDrone in forum General Support
    Replies: 1
    Last Post: 08-08-2006, 09:25 AM
  3. Permissions
    By w5uc in forum MS Windows & New to Linux
    Replies: 4
    Last Post: 05-01-2005, 08:18 PM
  4. KDE permissions and user permissions!!!
    By newiaqua in forum Hdd Install / Debian / Apt
    Replies: 4
    Last Post: 12-26-2004, 07:49 PM
  5. HD Map is fscked?
    By tilleyrw in forum General Support
    Replies: 2
    Last Post: 05-12-2004, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD picture

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD

$99.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1... picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...

$324.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$378.93



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD

$149.99



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$248.00



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W

$524.99



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99



Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00