Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: How to add apps in re-master from other OS'es?

  1. #1
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305

    How to add apps in re-master from other OS'es?

    Apt-get is provided for Debian apps.

    In re-mastering with other OS apps, what re-mastering steps are required?

    The installs are made in Chroot environment so KDEPACKAGE is not useable(needs X).

    Perhaps someone has an answer.




    Asking may get you knowwhere.

    Speaksoftly..usebraille.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    what exactly do you mean?
    something gnu not among the more than 8000 available in apt repositories or??
    or are you talking about a windows, OS2, macOS app?

  3. #3
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305
    A list appears below which apt-get does not install:

    crystalspace-doc
    dcmtk-doc
    tomcat4-web
    fop-doc
    amaya
    ac12
    amd-64-libs
    emacs20 mozart-doc-html
    nada-reference
    argoumi-doc
    gandalf-doc
    ldapter
    pike 7.6-reference
    Opera

    None of the above load with apt-get install.

    They do appear in KPACKAGE listing made prior to re-master procedure.

    I assume they are not native Debian therefore.

  4. #4
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    they are available in apt, hmm, some are non free, like Opera. what is in your apt sources list?

  5. #5
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305
    I am not a Debian aware user but have interest in testing a procedure for increasing the DVD media utilization beyond the 2GB file limit.

    To do this requires approximately 3.5GB of apps so I selected large- sized apps at random not realizing they may not be installable.

    None of the listed apps would install with apt-get install.

    Googling says KPACKAGE can be used to derive packages to install from other sources. It did not respond while in chroot mode.

    I do not know.....apt sources list... that you mention.

    Thank you for your response. It seems strange that packages should be listed that the user cannot download!!!

    This does seem to get more complex as I delve into it...

  6. #6
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    apt uses /etc/apt/sources.list, a plain textfile, that tells apt where too look for new programs.
    you may have to add a few extra depositories to be able to install some of those files...
    could you post what you have in that file curently?

  7. #7
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305
    OErjan;
    The list is reproduced below:
    ==============================# /etc/apt/sources.list for Knoppix
    # If you want to do a "full upgrade", you should first
    # upgrade the Packages from Debian/unstable (KDE & Co.)
    # before doing a (dist-)upgrade for Debian/testing.
    #
    # See sources.list(5) for more information, especialy
    # Remember that you can only use http, ftp or file URIs
    # CDROMs are managed through the apt-cdrom tool.

    # Security updates for "stable"
    deb http://security.debian.org stable/updates main contrib non-free
    deb http://security.debian.org testing/updates main contrib non-free

    # Stable
    deb http://ftp.de.debian.org/pub/debian stable main contrib non-free
    deb http://ftp.de.debian.org/pub/debian-non-US stable/non-US main contrib non-free

    # Stable Sources
    #deb-src http://ftp.de.debian.org/pub/debian stable main contrib non-free
    #deb-src http://ftp.de.debian.org/pub/debian-non-US stable/non-US main contrib non-free

    # Testing
    deb http://ftp.de.debian.org/pub/debian testing main contrib non-free
    deb http://ftp.de.debian.org/pub/debian-non-US testing/non-US main contrib non-free

    # Testing Sources
    #deb-src http://ftp.de.debian.org/pub/debian testing main contrib non-free
    #deb-src http://ftp.de.debian.org/pub/debian-non-US testing/non-US main contrib non-free

    # Unstable
    deb http://ftp.de.debian.org/debian unstable main contrib non-free
    deb http://ftp.de.debian.org/debian-non-US unstable/non-US main contrib non-free

    # Unstable Sources
    #deb-src http://ftp.de.debian.org/debian unstable main contrib non-free
    #deb-src http://ftp.de.debian.org/debian-non-US unstable/non-US main contrib non-free

    # Experimental
    deb http://ftp.de.debian.org/debian ../project/experimental main contrib non-free

    # Experimental Sources
    #deb-src http://ftp.de.debian.org/debian ../project/experimental main contrib non-free

    # ndiswrapper source
    deb http://ndiswrapper.sourceforge.net/debian ./

    # NX stuff
    # deb http://www.kalyxo.org/debian/ experimental main
    # deb http://www.kalyxo.org/debian/ unstable main

    # ndiswrapper
    # deb http://rigtorp.se/debian unstable/
    # deb-src http://rigtorp.se/debian unstable/

    # Blades Repository (pppoeconf & co)
    # deb http://people.debian.org/~blade/testing ./
    # deb-src http://people.debian.org/~blade/testing ./

    # deb cdrom:[Debian GNU/Linux 2.2 r3 _Potato_ - Official i386 Binary-1 (20010427)]/ unstable contrib main non-US/contrib non-US/main

    # Knoppix special packages resource at LinuxTag HQ
    # deb http://developer.linuxtag.net/knoppix ./
    # deb-src http://developer.linuxtag.net/knoppix ./

    # deb http://snapshot.debian.net/archive pool gcc
    # deb-src http://snapshot.debian.net/archive pool gcc
    ================================================== ==========================

  8. #8
    Senior Member registered user
    Join Date
    Jun 2003
    Posts
    611
    Its easy enough to remaster in graphical mode. Boot the CD with a cheatcode to runlevel 2. Move /etc/skel to /home/knoppix in the chrooted remaster filesystem. Chown -R /home/knoppix to knoppix:knoppix. Create a /home/knoppix/.xinitrc file with contents:

    startkde


    Then:
    su knoppix
    startx

    When done move home/knoppix/bacxk to /etc/skel and chown -R etc/skel back to root:root

  9. #9
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305
    arkaine23;

    Mitey fine to hear from you on this subject. I have googled a bit or two about the graphical mode remaster but haven't attempted but just the method described by Sunnijl which employs KDE procedures but chroots to /mnt/hda3/KNOPPIX (the KNOPPIX/KNOPPIX file).

    I was successful in re-mastering KNOPPIX v3.8 Cebit to 748MB size and used a "SPLIT" .iso procedure to generate a DVD burn. Modified the isolinux.cfg to permit automatic boot-up to persistent home config.

    The "SPLIT" .iso method employs a "prefix.iso" which is concatenated with a "suffix.iso". The prefix.iso is essentially everything but the /KNOPPIX/KNOPPIX derived from the KNOPPIX v3.8 .iso. The suffix.iso is generated by the re-master procedure operated on the KNOPPIX/KNOPPIX file. Mkisofs is applied to generate the compressed fs and again mkisofs is applied to generate a full .iso after inserting the modified KNOPPIX/KNOPPIX file into a copy of the CDROM (KNOPPIX V 3.. The resultant .iso is loop-mounted and the prefix.iso and suffix.iso are concatenated to produce the final re-mastered .iso.

    I am not certain whether your method will permit the "SPLIT" mode to be employed.

    The full purpose of doing all this is to test the proposition that the "SPLIT" procedure will permit the loading of a DVD disc to full capacity rather than be limited to 2GB as is the case with isolinux.iso generators.

    To test the proposition I would be satisfied if I could randomly load large-sized applications totaling 3.6GB. This would make the total 4.4GB.

    It seems my attempts to load random apps from the KPACKAGE listings produced no loadable apps in apt-get install. I selected apps which had no conflicts and most were 20MB or more.

    I probably need more smarts about debian access than I have at present.

    I expect it will take around 300 apps to get to 3.5GB if the data listed for the apps is compressed file size. If it is not, then I will need 6-8GB of apps!!!

    As you can plainly see, I am not a Debian user except to try this "SPLIT" thing and probably try it on other LiveCD's as well.

    I hope this description makes sense to you. The listing of /etc/apt/sources was made from my "SPLIT" .iso of KNOPPIX V 3.8 DVD (748mb).

    The DVD illustrates that the "SPLIT" works but is no guarantee it will carry out to 4.4GB since it can go to 2GB under normal conditions.

    It seems that loading 3.0+ apps in Debian can be a resl pain!!



    Speak softly..use braille.

    Asking may get you knowwhere...

    You can have the last word with your wife...just say WHAT?

  10. #10
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Ca
    Posts
    305
    After further inspection, it is obvious that the downloaded programs are installed without compression.

    This means that the total of downloaded material is near 9GB with the limit of 4.4GB in compressed mode.

    Examining the listing of files for KNOPPIX DVD 3.5( there are ~2GB of compressed files on the DVD) shows 2660 apps listed.

    It seems therefore I must load somewhere in the vicinity of 2600 apps to reach a total exceeding the 2GB limit with room to spare.

    For this test, the actual app isn't the important factor but the total size is.

Page 1 of 2 12 LastLast

Similar Threads

  1. C KDE APPS and C apps printing unix commands
    By dvryknopper in forum General Support
    Replies: 1
    Last Post: 03-31-2006, 05:56 AM
  2. Using VMWare Player to run different OS'es including ISO of
    By patelbhavesh in forum General Support
    Replies: 1
    Last Post: 12-30-2005, 01:37 AM
  3. Mode Master on WPC54G
    By Terminator15 in forum Networking
    Replies: 0
    Last Post: 12-02-2005, 02:34 AM
  4. How do i set the Lilo to the MBR of my primary master HDD?
    By Dryfter in forum Hardware & Booting
    Replies: 0
    Last Post: 04-24-2005, 07:44 PM
  5. Doing a re-master from a CD ?
    By Flying2Eagles in forum Customising & Remastering
    Replies: 5
    Last Post: 11-09-2003, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡ picture

🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡

$109.99



Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P picture

Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P

$149.99



Juniper Networks EX3400-24T 24-Port Ethernet Switch w/Power Cord picture

Juniper Networks EX3400-24T 24-Port Ethernet Switch w/Power Cord

$174.99



Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch picture

Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch

$245.00



Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic picture

Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic

$79.86



Juniper Networks AP33-US Indoor Wifi6 (US Version) 5GHz: 4x4:4; 2.99 picture

Juniper Networks AP33-US Indoor Wifi6 (US Version) 5GHz: 4x4:4; 2.99

$24.99



Juniper MX204 +JUNOS and Dual Power Supply picture

Juniper MX204 +JUNOS and Dual Power Supply

$7299.99



Juniper EX2300-C-12P 12 Port Gigabit PoE+ 2x10G SFP+ Managed Compact  Switch picture

Juniper EX2300-C-12P 12 Port Gigabit PoE+ 2x10G SFP+ Managed Compact Switch

$179.99



Juniper Networks Mist Wireless Access Points, Model AP45 picture

Juniper Networks Mist Wireless Access Points, Model AP45

$59.99



Juniper Networks EX2300-48P 48-Port Gigabit PoE Managed Ethernet Switch picture

Juniper Networks EX2300-48P 48-Port Gigabit PoE Managed Ethernet Switch

$79.99