how do I enable ssh on kx 3.8.1

[cli168]

Can someone tell me how to enable ssh on kx 3.8.1?

Thanks,
Charles Li

[eco2geek]

When running from the live CD:

In KDE, go to the Knoppix menu (it's the "penguin" icon to the right of the "K menu" on the kicker bar at the bottom of the screen). Select "Services > Start SSH Server."

Take a moment to look through the menus, if you haven't already. See what's there.

[dlong_]

Hm.

I have a computer that's booting normally, but the video card isn't working properly.

Is there a way to boot into Knoppix from the live CD and enable the ssh server without a monitor?

(I.e. what are the keystrokes that you could use to enable the ssh server without using a mouse? Or... is there a service running by default or that could be started that would allow me to enable the ssh server from remote?)

[UnderScore]

All this assumes that you are on a LAN with DHCP enabled so that the machine will automatically get an IP address.

when knoppix boots off the CD it will wait at the boot splash screen, enter the command:
knoppix 2

After some minutes go by, knoppix will boot to a root enabled command prompt. change the root user's password: passwd

Then type in a temporary password followed by the ENTER key. It needs you to confirm it so type in that same temporary password followed by the ENTER key.

Then run the sshd service: /etc/init.d/sshd start


Then from another machine try to connect to it via ssh. I know that a machine on my LAN will get a 192.168.1.0/24 address, and I will guess that a this machine will get 192.168.1.12. Use the ssh client from another machine:
ssh [email protected]

You will know if it is working when you see stanard ssh connection info.

[dlong_]

That is excellent!

I checked over at the Knoppix wiki before asking the question. I will update the wiki so the information is available to other users.

Thanks.