Results 1 to 10 of 10

Thread: problems at boot

  1. #1
    Junior Member
    Join Date
    Apr 2003
    Posts
    4

    problems at boot

    This is my first try w/ knoppix and i have very limited exp. w/ linux.

    I am using my friends cd which works fine on his computer but on mine it just goes to the kewl Knoppix "eye" screen after the tux boot and hangs with full mouse mobility but no desktop. Then after like 2-3 mins it "halts" and ejects the cd.
    Says:
    X-windows terminated w/o errors.
    Spurious 8259a interrupt: irq 7
    sent term and kill signal
    umounting...can't umount...blah blah

    you get the idea i hope.
    Can you help w/o knowing my comp specs?

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Which of these cheat codes are you using?
    http://www.knoppix.net/docs/index.php/CheatCodes

  3. #3
    Junior Member
    Join Date
    Apr 2003
    Posts
    4
    i tried "knoppix lang=en xmodule=nv noscsi wheelmouse" and it still did not work....but the halt text was a lil different...lik the IRQ 7 thing did not show up.

  4. #4
    Senior Member registered user
    Join Date
    Dec 2002
    Location
    Royal Oak, Michigan USA
    Posts
    199

    Re: Problems at boot

    Quote Originally Posted by toeknee
    ...Spurious 8259a interrupt: irq 7...
    Make sure that Plug & Play is turned OFF in the BIOS. It may be labeled as Plug and Play Aware OS or similar, and its location in the BIOS setup varies. I think that the PnP scan can create interrupts that are read as "spurious" by Linux on some systems. It's not usually needed by Windows, either...

  5. #5
    Junior Member
    Join Date
    Apr 2003
    Posts
    4
    ummm tried to the pnp thing...tried a 100 different cheat codes (each w/ new halt messages) and it just ejects the cd after getting b/g and cursor. The DVD-rom i boot from blinks for a while and then just goes solid amber and makes a weird noise.

  6. #6
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    How about some system specs?

  7. #7
    Senior Member registered user
    Join Date
    Dec 2002
    Location
    Royal Oak, Michigan USA
    Posts
    199
    Quote Originally Posted by toeknee
    The DVD-ROM I boot from blinks for a while and then just goes solid amber and makes a weird noise.
    Hmmm...Is it a Pioneer DVD-ROM? I know I had boot problems with my DVD-115 until I updated the on-board firmware -- still can't get it to boot my SuSE install DVD-ROM, but it boots Knoppix -- and everything else -- OK.

    As prevously stated, more feedback would help...

  8. #8
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Quote Originally Posted by toeknee
    ummm tried to the pnp thing...tried a 100 different cheat codes .
    Did you try this one:

    boot: failsafe

  9. #9
    Junior Member
    Join Date
    Apr 2003
    Posts
    4
    i tried failsafe...i have a amd athlon xp 1533 mhz....396 mb ram, 60 gigs hdd...blahblah....oh and nvidia 2 440

  10. #10
    Senior Member registered user
    Join Date
    Dec 2002
    Location
    Royal Oak, Michigan USA
    Posts
    199
    Quote Originally Posted by toeknee
    i tried failsafe.. Ii have an amd athlon xp 1533 mhz....396 mb RAM, 60 gigs hdd...blahblah....oh and nvidia 2 440
    Which chipset? Or motherboard manufacturer & model, so we can figure it out? Which brand & model of DVD drive (RE my earlier reply)?

Similar Threads

  1. Boot problems again
    By philski27 in forum Laptops
    Replies: 4
    Last Post: 06-04-2004, 02:54 PM
  2. Boot up problems
    By Linuxguy in forum General Support
    Replies: 4
    Last Post: 02-06-2004, 07:00 PM
  3. Boot / boot loader problems
    By Loper in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 07-11-2003, 02:38 AM
  4. Boot Problems :(
    By MadMunky in forum General Support
    Replies: 3
    Last Post: 06-07-2003, 03:16 AM
  5. Problems with x - Boot-shutdown... Boot-shutdown...Boot-shut
    By _CaLeB_ in forum Hardware & Booting
    Replies: 5
    Last Post: 03-31-2003, 06:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$484.99



Microsoft Windows Server 2025 Standard 64Bit 16 Core-50 CALs DVD With Key Sealed picture

Microsoft Windows Server 2025 Standard 64Bit 16 Core-50 CALs DVD With Key Sealed

$41.19



VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack) picture

VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack)

$1599.95



DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard) picture

DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)

$399.95



Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$308.00



Supermicro 2U GPU Server SYS-2029GP-TR 2x Xeon 6130 32C 6x PCIe 3.0 x16 Slots picture

Supermicro 2U GPU Server SYS-2029GP-TR 2x Xeon 6130 32C 6x PCIe 3.0 x16 Slots

$745.00



Dell PowerEdge C4130 1U AI GPU Server E5-2698 V4 | No RAM | 2x 1600W PSU picture

Dell PowerEdge C4130 1U AI GPU Server E5-2698 V4 | No RAM | 2x 1600W PSU

$414.99



MICROSOFT WINDOWS SERVER 2025 RDS 50 CAL NEW Factory Sealed picture

MICROSOFT WINDOWS SERVER 2025 RDS 50 CAL NEW Factory Sealed

$136.87



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00