Results 1 to 4 of 4

Thread: configs.tbz/knoppix.sh related error message on boot

Hybrid View

  1. #1
    Member registered user
    Join Date
    Mar 2005
    Posts
    38

    configs.tbz/knoppix.sh related error message on boot

    Hi all, just started using 3.8.1 as a pmi. I get the following msg when booting after using the myconfig=/mnt/hdb3 cheat code:

    All appears normal throughout the boot process until after the 'extracting config archive /mnt/hdb3/configs.tbz ... '

    The following msg then appears in gray:

    /mnt/hdb3/knoppix.sh: line 11: 1819 terminated pump -i$DEVICE >/dev/null 2> &1

    Then everything carries on as normal, and my config settings are loaded up. Any ideas as to what's causing this? TIA.

  2. #2
    Senior Member registered user
    Join Date
    Aug 2004
    Location
    Sydney/Australia
    Posts
    311
    Hi,

    >>
    >/dev/null 2> &1
    >>

    change to ...

    >/dev/null 2>&1

    It's probably the space between the '2>' and the '&'.

    The shell will see that as a field seperator/termination, and get confused as to where you want the redirection to actually go.


    jm

    Code:
     -:-  If the system is the answer, then the question
                   must have been really stupid  -:-

  3. #3
    Member registered user
    Join Date
    Mar 2005
    Posts
    38
    Thx for the response. As far as I was aware I wasn't redirecting it at the time (I certainly wasn't typing anything in except the myconfig cheat code. Anyway, I now save myconfig to a different location and for the moment, it's not giving me any more messages. Don't know how long it will last though ..

  4. #4
    Senior Member registered user
    Join Date
    Aug 2004
    Location
    Sydney/Australia
    Posts
    311
    >>
    -i$DEVICE >/dev/null 2> &1
    >>

    The shell will see $DEVICE as a variable to expand(macro),

    the shell will interpret >/dev/null to mean you want the output to go to the abyse. Often used when all the script wants is the return status of the command, the 2> &1 is where the error was. The shell would normally expect it to read 2>&1 interpreting it to mean that you also want the standard error to be redirected to the standard output, and they can both go to the abyse.

    Especially if the comand is being run in an non-interactive shell, which it probably is.

    The error is just the "space" character. Which will be seen as a field seperator.

    try in a term window ...

    ]$ ls /dev/null
    ]$ ls /dev/null 2>&1
    ]$ ls /dev/null 2>
    ]$ ls /dev/null 2> &1

    notice the messages.

    Not sure how it is being used in the script concerned, but it will cause it to fall over at that point.

    Just needs a minor edit


    jm

    Code:
     -|-  If the system is the answer, then the question
                   must have been really stupid         -|-

Similar Threads

  1. Error message on boot up
    By jkwash in forum Hardware & Booting
    Replies: 1
    Last Post: 05-21-2005, 12:18 PM
  2. Installing KNOPPIX.V3.6 Boot error message
    By sala94 in forum General Support
    Replies: 2
    Last Post: 12-21-2004, 04:20 PM
  3. Boot error message
    By Calvi Risorta in forum Hdd Install / Debian / Apt
    Replies: 6
    Last Post: 05-29-2004, 11:01 AM
  4. winxp, gentoo, knoppix, grub, and a boot error message
    By SgtRauksauff in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 05-06-2004, 12:38 AM
  5. Boot error message
    By epi in forum General Support
    Replies: 1
    Last Post: 01-21-2004, 02:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch picture

TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch

$19.99



NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch picture

NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch

$49.99



Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch picture

Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch

$46.99



TP-Link 5-Port Gigabit Unmanaged Ethernet Switch Network Expansion TL-SG105 picture

TP-Link 5-Port Gigabit Unmanaged Ethernet Switch Network Expansion TL-SG105

$19.95



10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W picture

10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W

$39.99



5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S... picture

5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S...

$9.64



TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597 picture

TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597

$36.98



Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch picture

Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch

$115.00



5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play picture

5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play

$31.99



Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks picture

Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks

$224.95