Results 1 to 4 of 4

Thread: configs.tbz/knoppix.sh related error message on boot

  1. #1
    Member registered user
    Join Date
    Mar 2005
    Posts
    38

    configs.tbz/knoppix.sh related error message on boot

    Hi all, just started using 3.8.1 as a pmi. I get the following msg when booting after using the myconfig=/mnt/hdb3 cheat code:

    All appears normal throughout the boot process until after the 'extracting config archive /mnt/hdb3/configs.tbz ... '

    The following msg then appears in gray:

    /mnt/hdb3/knoppix.sh: line 11: 1819 terminated pump -i$DEVICE >/dev/null 2> &1

    Then everything carries on as normal, and my config settings are loaded up. Any ideas as to what's causing this? TIA.

  2. #2
    Senior Member registered user
    Join Date
    Aug 2004
    Location
    Sydney/Australia
    Posts
    311
    Hi,

    >>
    >/dev/null 2> &1
    >>

    change to ...

    >/dev/null 2>&1

    It's probably the space between the '2>' and the '&'.

    The shell will see that as a field seperator/termination, and get confused as to where you want the redirection to actually go.


    jm

    Code:
     -:-  If the system is the answer, then the question
                   must have been really stupid  -:-

  3. #3
    Member registered user
    Join Date
    Mar 2005
    Posts
    38
    Thx for the response. As far as I was aware I wasn't redirecting it at the time (I certainly wasn't typing anything in except the myconfig cheat code. Anyway, I now save myconfig to a different location and for the moment, it's not giving me any more messages. Don't know how long it will last though ..

  4. #4
    Senior Member registered user
    Join Date
    Aug 2004
    Location
    Sydney/Australia
    Posts
    311
    >>
    -i$DEVICE >/dev/null 2> &1
    >>

    The shell will see $DEVICE as a variable to expand(macro),

    the shell will interpret >/dev/null to mean you want the output to go to the abyse. Often used when all the script wants is the return status of the command, the 2> &1 is where the error was. The shell would normally expect it to read 2>&1 interpreting it to mean that you also want the standard error to be redirected to the standard output, and they can both go to the abyse.

    Especially if the comand is being run in an non-interactive shell, which it probably is.

    The error is just the "space" character. Which will be seen as a field seperator.

    try in a term window ...

    ]$ ls /dev/null
    ]$ ls /dev/null 2>&1
    ]$ ls /dev/null 2>
    ]$ ls /dev/null 2> &1

    notice the messages.

    Not sure how it is being used in the script concerned, but it will cause it to fall over at that point.

    Just needs a minor edit


    jm

    Code:
     -|-  If the system is the answer, then the question
                   must have been really stupid         -|-

Similar Threads

  1. Error message on boot up
    By jkwash in forum Hardware & Booting
    Replies: 1
    Last Post: 05-21-2005, 12:18 PM
  2. Installing KNOPPIX.V3.6 Boot error message
    By sala94 in forum General Support
    Replies: 2
    Last Post: 12-21-2004, 04:20 PM
  3. Boot error message
    By Calvi Risorta in forum Hdd Install / Debian / Apt
    Replies: 6
    Last Post: 05-29-2004, 11:01 AM
  4. winxp, gentoo, knoppix, grub, and a boot error message
    By SgtRauksauff in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 05-06-2004, 12:38 AM
  5. Boot error message
    By epi in forum General Support
    Replies: 1
    Last Post: 01-21-2004, 02:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS picture

Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS

$179.98



Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS picture

Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS

$239.99



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor   picture

Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor

$50.00



Genuine Intel Xeon W-2145 3.70Ghz  8 Cores LGA2066 CPU SR3LQ Tested USA SELLER  picture

Genuine Intel Xeon W-2145 3.70Ghz 8 Cores LGA2066 CPU SR3LQ Tested USA SELLER

$94.94



Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS picture

Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS

$84.49



Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA picture

Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA

$350.48



INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU picture

INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU

$12.00



Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



DELL Precision T3420 | Xeon 1240v6 | 525GB SSD |16GB RAM |Nvidia GPU |Win11 picture

DELL Precision T3420 | Xeon 1240v6 | 525GB SSD |16GB RAM |Nvidia GPU |Win11

$149.00