-
Junior Member
registered user
Problems
i had knoppix installed on my hdd for about 1 month now....everything seems fine....... but after i did an apt-get dist-upgrade the problems started.... when i open a program, it takes very long to open, knoppix does not detect my internet anymore... i just downloaded nicotine through apt-get and can't open it as well........any ideas what is wrong ?
-
As you probably noticed knoppix should not be dist-upgraded. Install kanotix if you want to upgrade.
Some services were probably added to startup links, check with: sudo netstat -tupan|grep LISTEN
For internet run netcardconfig, ifconfig, ifup eth0, pump -i eth0
Check for errors in dmesg, /var/log/syslog and other logs under /var/log
Similar Threads
-
By mindmeddler2003 in forum General Support
Replies: 1
Last Post: 02-03-2004, 07:29 PM
-
By lesshaste in forum General Support
Replies: 2
Last Post: 01-09-2004, 05:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1499.00

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97

867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W
$899.99

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00