I have the same problem with my Gericom 1st Supersonic PCI E 1660 with no card inserted
Does anybody have a solution?
I have a Sony Vaio FS195XP which I really want to use Knoppix on, however
every time I get to 'PCMCIA card found, starting cardmgr' it freezes. Any Ideas?
Thanks in advance!
I have the same problem with my Gericom 1st Supersonic PCI E 1660 with no card inserted
Does anybody have a solution?
knoppix acpi=off
helps booting Knoppix 3.9 to the desktop, but now I cannot setup my AVM FritzCard DSL SL USB-Modem![]()

(2) Seagate SAS Hard Drive Exos 7E8 3TB 7200RPM 128MB 12Gb/s 3.5 ST3000NM0035
$49.99
Seagate BarraCuda ST3000DM008 3TB Internal SATA 6Gb 3.5" Hard Drive 7200RPM 64MB
$91.99
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
Dell EMC WD-HITACHI H5H72101CLAR10T0 10TB 7.2K SAS 12Gb/s SED 3.5in A POH 0-50k
$189.99
Toshiba MG04ACA400 4TB 3.5-inch SATA 6 Gb/s 7,200 RPM Internal Hard Drive
$49.99
ST6000NM0034 DELL 6TB 7.2K 12G SAS 512E 3.5" ENTERPRISE HARD DRIVE 8D1V4 08D1V4
$54.99
Seagate ST28000NM001C 28TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$669.99
Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$299.00
HDD 3.5" SATA Hard Drive with Windows 10/Win 11 64x Installed Legacy
$35.00
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$329.99