Scanner

[jjbergdolt]

How to get my scanner working.
It is recognized by sane-find-scanner and usbview.
When I try to scan in xscanimage I get the following error message " Failed to start scanner: Invalid argument".
Thinks are the same with Kooka.
What is wrong?
-----------
knoppix@1[~]$ sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1105 [HP Scanjet 5400C Series]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.

[jjbergdolt]

Everythink works fine now with the new Knoppix 9.0.