system halt when start X

[panlm]

error messages follow
"
starting X11 ... [drm: drm_init] *ERROR Cannot initialize the agppart module
/lib/modules/2.4.20-xfs/kernal/drivers/char/drm/i810.o init_module: cannot allocate memory
...
...
"

i used the knoppix on my laptop ( ibm thinkpad r31, shared memory for my i810 video card )
i don't know how to resolv this problem .
thanx for all

[garyng]

you didn't say which KNOPPIX build, some works some don't for my Dell which is also a i810 based system.

[panlm]

i used the newest version of knoppix released at 2003/4/15

[RockMumbles]

Try booting with:

knoppix pci=biosirq

rock

[panlm]

Try booting with:

knoppix pci=biosirq

rock

i have tried this option , but fail.
i can see X when i set mem=120M . because follow message in dmesg:
"
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
linux agppart interface v0.99 (c) Jeff Hartmann
agppart: Maximum main memory to use for agp memory: 96M
agppart: detected an Intel 830M chipset.
agppart: detected 8060K stolen memory.
agppart: AGP aperture is 128M @ 0x98000000
memory: c70d5170
memory: c57e2ed0
memory: c57e2d90
memory: c57e2e50
[drm] AGP 0.99 aperture @ 0x98000000 128MB
[drm] Initialized i830 1.3.2 20021108 on minor 0
mtrr: base(0x98000000) is not aligned on a size(0x180000) boundary
memory: c57e2dd0
memory: c57e2d90
memory: c57e2d50
memory: c57e2d10
memory: c57e2cd0
PCI: found irq 11 for device 00:02.0
PCI: sharing irq 11 with 00:1d.0
PCI: sharing irq 11 with 00:1f.1
"

i don't konw why . who can tell me . thanx

[garyng]

try expert mode and go into the x86config(you would be prompted), change the monitor value. The default 28-96 is too wide for my LCD with i810. I changed it to something like 28-57 and it works.