-
Low end PC
I tried to install the 3.9 on an old IBM 300GL with a Celeron 466/192 RAM, I do the beginner install, when I input the user password I got an error that the white background image can not be loaded, and the password field is corrupted I can't see what's in there, after many retries I still can not verify my password. The onboard video is intel810 with 1M shared memory that I can't change, but I installed Ubuntu on the same hardware without problem, it seems that Knoppix has much higher requirement on hardware.
-
Administrator
Site Admin-
Re: Low end PC

Originally Posted by
lotech
it seems that Knoppix has much higher requirement on hardware.
Really? You don't come right out and say it, but the implication is that Knoppix runs just fine on that system as it was intended to run, from the CD. So I hardly think it likely that KNoppix needs more resources when run from disk than from CD, i's much more likely just another in the long list of issues installing something that wasn't designed for HD install.
OH, and I'm moving this to the HDD install forum where it makes more sense.
-
It took centuries to load the desktop config so I can't change the wall paper to reduce memory useage, and if I can pass the password setup screen then I will know how good is the HD install, may be I got a bad display card.......
-
Administrator
Site Admin-

Originally Posted by
lotech
It took centuries to load the desktop config so I can't change the wall paper to reduce memory useage, and if I can pass the password setup screen then I will know how good is the HD install, may be I got a bad display card.......
I'm not sure what you mean by the desktop config, but if you mean just a normal boot into the gui, well it takes me less than centuries on even lower rated computers. So there could be other issues, like maybe the CD was burnt at a high speed.
-
I'm running it on a P233 mmx with 96MB ram and a 4meg video card
I'm breaking no benchmark records but it takes less than 2 minutes to boot to gui (unless I use KDE) from a hd install
-
Senior Member
registered user
Knoppix is very fast.
Knoppix/kde in my celeron 1GHZ/116RAM is 3/4 ninutes faster to load than Ubuntu/gnome. Once loaded bother ubuntu take almost the same time to open the root shell as knoppix to open openoffice
And once installed performance obviusly increase.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU
$315.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99