DON'T use apt-get upgrade! It ruins the delicate balance of Knoppix's software versions. Your current kernel is fine.
I have Knoppix 3.9 installed on my hd using knoppix-installer.
I updated it with apt-get upgrade.
But how to ugrade to the last version of the kernel (currently 2.6.12.3).
Knoppix is based on kernel 2.6.11.
DON'T use apt-get upgrade! It ruins the delicate balance of Knoppix's software versions. Your current kernel is fine.
What do you suggest to maintain the software up to date?
Do I have to install everytime the last Knoppix version?
Perhaps you are looking at this wrong. The problem isn't anything wrong with apt-get upgrade. It's that you chose to install Knoppix (which breaks if you run apt-get upgrade) rather than installing Debian (which does not).
I agree with Harry. Knoppix is:
- Great as a LiveCD
- Okay for a short-term HDD install
- Not good for a permanent HDD installation
Try Debian. It's quite stable and very well supported in the Linux community.
Many thanks for your useful advices.
Will Debian recognize my hardware as well as Knoppix?
Can't answer that, don't know what your hardware is.Originally Posted by jjbergdolt
I recently installed Debian. It did a much better job than past versions of Linux I've tried to install. I only had to deal with technical information in one area, the monitor's frequency range (which is strange, because it is a plug-and-play monitor and the Debian installer seemed to detect it and get the information that way too!). Everything else went well. Debian didn't set up my standard Sound Blaster 16 sound card (I still haven't figured out how to set it up), but Knoppix doesn't detect and set it up either.
The bottom line is that Debian is getting much better, and Knoppix is failing in a lot more areas than it used to. So for any small extra effort you might spend in setting up a Debian system, you gain an awful lot in installing exactly what you want, in learning how to properly do a real install, and in having a system that will allow you to upgrade and install more things without breaking existing things.
Knoppix has a very well-developed hardware detection script, so it will probably do better detection than Debian initially.Originally Posted by jjbergdolt
However, since they are both Linux and both based on the same development packages, Debian is in no way inferior to Knoppix, and with a little fiddling & googling, you should be able to get all your currently working hardware to work just as well in Debian.

Broadcom LSI 9305-16i 12Gbps SAS-3 PCIe x8 HBA 16-Ports Raid Controller
$64.99
Broadcom MegaRAID 9480-8e Fujitsu PRAID EP540e SAS RAID Card (Replac 9380-8e) 8i
$228.00
2-Bay RAID Enclosure for 2.5/3.5" SATA HDD/SSD External Hard Drive, USB 3
$59.99
9300-8i LSI SAS3008 8-Port 12Gb PCIe IT mode ZFS FreeNAS unRAID 2*SFF-8643 US
$49.50
OWC Mercury Elite Pro 2 Bay RAID Enclosure with USB 3.2 for Dual 3.5 inch HDDs
$87.99
LSI 9260-8i 512MB SAS SATA 8-port PCI-E 6Gb RAID Controller Card US
$29.88
Dell PERC H740p Mini Mono RAID Controller 8GB 0878M 5FMY4 GP6RN
$55.00
MegaRAID 9580-8i8e 16-port 12G SAS/SATA/NVMe 8GB PCIe RAID - 05-50076-00
$1619.30
CalDigit VR minin 2 Portable Raid Storage On The Go
$75.00
EMC KTN-SL3 15-Bay Disk Array Enclosure w/2x 303-108-000E Cards, Dual PSU,No HDD
$239.99